background image

5

USER’S GUIDE

INSPECTION & MAINTENANCE

Before suspending any speaker system always inspect all components (enclosure, rigging frames, pins, eyebolts, 

track fittings, etc.) for cracks, deformations, corrosion or missing/loose/damaged parts that could reduce strength 

and safety of the array. Do not suspend the speaker until the proper corrective action has been taken. Use only 

load-rated hardware when suspending JBL suspendable loudspeaker models.
Suspension systems are comprised of mechanical devices and, as such, they require regular inspection and routine 

maintenance to ensure proper functionality. Before suspending or pole mounting any speaker system, always 

inspect all components (enclosure, suspension frames or brackets, pins, eyebolts, etc.) for cracks, deformations, 

corrosion or missing/loose/damaged parts that could reduce strength and safety of the array.
Do not suspend or pole mount the speaker until the proper corrective action has been taken. 
Installed systems should be inspected at least annually. The inspection shall include a visual survey of all corners and 

load-bearing surfaces for signs of cracking, water damage, delamination or any other condition that may decrease 

the strength of the loudspeaker enclosure.
Accessory suspension hardware provided with or for BRX systems must be inspected for fatigue at least annually 

or as required by local ordinance. The inspection shall include a visual survey of the material for signs of corrosion, 

bending or any other condition that may decrease the strength of the fastener. Additionally, any eyebolts shall be 

checked for possible spin-out of the enclosure.
For all other hardware and fittings, refer to the hardware manufacturer’s inspection and maintenance guidelines for 

process.
JBL is not responsible for the application of its products for any purpose or the misuse of this information for any 

purpose. Furthermore, JBL is not responsible for the abuse of its products caused by avoiding compliance with 

inspection and maintenance procedures or any other abuse.
Prior to suspending the system, an expert, trained and experienced in suspending speaker systems, should inspect 

all parts and components.

ATTACHMENT TO STRUCTURES

A licensed Professional Engineer must approve the placement and method of attachment to the structure prior to 

the installation of any overhead object. The following performance standards should be provided to the Professional 

Engineer for design purposes: Uniform Building Code as applicable, Municipal Building Code as applicable and 

Seismic Code as applicable. The installation of the hardware and method of attachment must be carried out in the 

manner specified by the Professional Engineer. Improper installation may result in damage, injury or death.

INSPECTION & MAINTENANCE

Содержание JBL Professional BRX 300 Series



















Отзывы: