JBL MARINE
СНАРТЕR 2: INSTALLAТION AND WIRING
What's in the Ьох:
JBL Marine МА704
1 amplifier
Stainless steel mounting hardware
Rubber inserts
4 High-level input adapters
2 spare fuses
2 2-color brand stickers
Quick start guide
Precautions:
JBL Marine МА4505
1 amplifier
Stainless steel mounting hardware
Rubber inserts
4 High-level input adapters
3 spare fuses
2 2-color brand stickers
Quick start guide
1 MPORTANT: Disconnect the vehicle's negative
Н
battery terminal before beginning the installation.
• Always wear protective eyewear when using tools.
• Choose а safe mounting location, away from moisture. Check clearances оп both sides of а planned mounting surface. Ве sure that screws
or wires will not puncture brake lines, fuel lines, or wiring harnesses and that wire routing will not interfere with the safe vehicle
operation. Use caution when drilling or cutting in the mounting area.
• When making electrical connections, make sure they are secure and properly insulated.
• lf you must replace апу of the amplifier's fuses, use the same type of fuse and current rating as the original.
• То keep the amplifier cool, choose а location that provides good air circulation.
• Do not mount the amplifier with the heat sink facing downward, as this interferes with cooling.
• Mount the amplifier in an area protected from the outdoor environment where it will not Ье exposed to direct contact with the elements.
• Mount the amplifier so that it will not Ье damaged Ьу shifting cargo, and so that it remains dry.
• Using the amplifier as а template, mark the locations of the holes оп the mounting surface.
• Drill pilot holes in the mounting surface.
• Attach the amplifier to the mounting surface with four appropriate mounting screws (included).
NОП: You may find it more convenient to make all of the connections to the amplifier before you permanently mount it.
