Harman EASY Touch Control Owners Manual
31
Your EASY Touch Control communicates with you by showing messages on the
top center of the EASY Touch Control home screen. If you have more than one
message, the messages will show consecutively until you acknowledge the mes-
sage by performing the task. These communications include:
PR
OMPTS
MESSA
GES
ERR
ORS
When prompted, scrape burnpot. Press check-
mark to reset.
When prompted, inspect and empty ash pan as
needed. Press checkmark to reset.
When prompted, inspect and perform total clean.
Press checkmark to reset.
Press checkmark if you filled the hopper.
If you did not fill hopper, The message will
disappear in 30 seconds.
Replace the 2 “AA” batteries in the Wireless
Remote Sensor.
If Wireless Remote Sensor batteries die, the Back
Up Sensor will continue to heat your home.
Check and close the front and ash doors for the
stove to continue to heat.
Close the hopper lid for the stove to continue
to heat.
Fill the hopper with pellets. Press checkmark to
reset. If you did not fill the hopper, the message
will stop after 30 seconds. This error only appears
if “Show Fuel Gauges” is turned on.
Batteries in Wireless Remote Sensor have expired.
Replace the 2 “AA” batteries.
Return Air Sensor has failed. Call your Harman
Dealer.
Unit has failed to ignite. Scrape the burnpot. Call
your Harman Dealer if problem persists.
Touch Control has lost communication to the
stove. Call your Harman Dealer.
Exhaust Sensing Probe (ESP) as failed. Clean the
ESP. If issue persists, call your Harman Dealer.
Clean your stove. Call your Harman Dealer if
problem persists.
Cleaning Prompts, Messages and Errors
