Harman dbx 504X, Руководство пользователя

Страница: 9 / 23

Digital Output Card
504X
504X Digital Output Card ®
9
NOTE: Although digital information is coming out of both XLR and RCA
jacks simultaneously, the correct format will only appear at the output for
the format type selected. For example, if you have AES/EBU format selected,
an AES/EBU formatted signal will appear at the output of both the XLR and
the RCA connector. Or, if you have S/PDIF format selected, an S/PDIF for-
matted signal will appear at the output of both the RCA and XLR connec-
tors.
WORD IN and OUT Connectors: BNC connectors are provided for both
wordclock in and out. The 504X uses low jitter phased-locked loops to
synchronize
to another unit’s wordclock output through the 504X’s word
in jack. The 504X will accept a 44.1kHz or a 48kHz wordclock input with
a toler-ance of ±100PPM. You also may use the 504X as a
host
clock
through the word out jack to supply stable clocks to other processors
that accept wordclock input. See “Word Input” for further information.
44.1kHz / 48kHz Switch: Selects output sample rate of either 44.1kHz or
48kHz.
16 Bit / 20 Bit Switch: Selects output wordlength of either 16 bits or 20
bits output resolution.
Note: When the front panel Dither switch is set to off, the output wordlength
will be 24 bits regardless of the position of the 16 Bit / 20 Bit switch.
Rear Panel (cont.)