Harman dbx 504X, Руководство пользователя

Страница: 7 / 23

Digital Output Card
504X
504X Digital Output Card ®
7
A. Remove the two 6-32" screws on the Silver Series main PCB direct-
ly below where the 504X will mount.
B. From the inside of the Silver Series product, place the 504X so that
the holes on the card line up with the holes in the main PCB.
C. Use the 4 screws that held the blank cover to secure the 504X
plate to the chassis. Start all four screws before tightening them
completely.
D. Carefully install the 10 pin cable (noting polarity) from the Silver
Series main PCB to the 504X.
E. Carefully install the short 14 pin cable (noting polarity) from the
Silver Series main PCB to the 504X.
7. Take the top part of the 504X and mount it carefully to its mating con-
nector on the lower card.
8. Line up two 1-3/16" round standoffs to the screw holes between the
lower 504X and the Silver Series main PCB.
9. Line up the other two 1-3/16" round standoffs to the screw holes
between the upper and lower PCBs of the 504X.
10. Place the two 6-32 3" screws through the round standoffs into the
Silver Series Chassis.
11. Install plastic insulator directly above 504X card on the inside of the
lid.
12. Replace the cover and screws to the Silver Series Product.
Fig. 2
dbx 504X
installed in a
dbx Silver Series
Installation (cont.)