Operation Manual
DSi 8M Cinema System Monitor
page 12
page 13
DSi 8M Cinema System Monitor
Operation Manual
OUTPUTS TO POWER AMPLIFIER INPUTS
DSi 8M System Monitor
HD-15 I/O connector
DSi power amplifier
HD-15 input
VGA cable
Figure 3.4 Connection to Monitor the DSi Power Amplifier Output
DSi 8M System Monitor
input connector
Power amplifier outputs
CH-2
CH-1
3 Installation (continued)
5. Connecting DSi 8M inputs to power amplifier outputs:
two options
Option 1:
If you have Crown DSi power amplifiers, use six VGA
cables as shown in Figure 3.1 and Figure 3.4.
Option 2:
Connect the amplifier loudspeaker outputs to the DSi
8M’s Phoenix input connectors I and J as shown in Figure 3.5.
Unshielded wire can be used. Section 5 gives the connector pin
assignments.
All the inputs on the rear panel are unbalanced except for the
sub woofer input.
Figure 3.5 Using Phoenix Connectors with Non-DSi Amplifiers
Pin #
Function
Function
1
GND
N/C
2
L +
N/C
3
N/C
Bsl –
4
GND
N/C
5
C +
Ch +
6
N/C
Bsr –
7
GND
GND
8
R +
Rh +
9
GND
N/C
10
LS –
Ls –
11
RS –
Rs –
12
SW –
Lh –
13
GND
N/C
14
L –
N/C
15
N/C
N/C
16
N/C
Bsl +
17
C –
Ch –
18
N/C
N/C
19
N/C
Bsr +
20
R –
Rh –
21
N/C
N/C
22
GND
N/C
23
LS +
Ls +
24
RS +
Rs +
25
SW +
Lh +
DB-25 Connector Pinout
Main
Processor
Outputs
Optional
Processor
Outputs
5 Specifications
Processor Inputs:
Eight inputs for the left, center,
right, surround left, surround right, back surround
left, back surround right, and subwoofer channels.
Power Amplifiers Inputs:
Eleven inputs for left
high and low, center high and low, right high and
low, surround left, surround right, back surround
left, back surround right, and subwoofer channels.
Input Impedance (Processor Inputs):
10 k
ohms.
Input Impedance (Power Amplifiers Inputs):
> 50 k ohms.
Power Requirements:
100-240V , 50-60 Hz,
32 watts.
Chassis:
Steel.
Dimensions:
EIA Standard 19-inch rack mount
width (EIA RS-310-B), 3.5 inches (8.9 cm) high and
9.625 inches (24.4 cm) deep behind front mounting
surface.
Net Weight:
10 lb 2 oz (4.63 kg).
Shipping Weight:
16 lb (7.26 kg).
10 PIN PHOENIX DSi 8M INPUTS FROM
AMPLIFIER OUTPUTS
1. Left surround
2. Right surround
3. Common
4. Back surround left
5. Back surround right
6. Common
7. Sub
8. Subwoofer –
9. Common
10. Chassis ground
1. Left high
2. Left low
3. Common
4. Center high
5. Center low
6. Common
7. Right high
8. Right low
9. Signal ground
10. Line output
4.1 Setting Monitor and Bargraph Levels
1. Set the cinema processor main fader and amplifier
levels so the house speakers are playing back at the
normal listening level. Select some source material like
pink noise.
2. On the DSi 8M, set the Processor/Amplifier Switch to
“Processor.” With the monitor volume set at 7, adjust
the Processor Trimpot for a comfortable listen ing level.
Set the Bargraph Trimpot for a reading in the middle
range.
3. On the DSi 8M, set the Processor/Amplifier Switch to
“Amplifier.” A djust the amplifier trimpot so the level
matches the processor level.
4 Operation
10 PIN PHOENIX DSi 8M OUTPUTS TO
POWER AMPLIFIER INPUTS
1. Left su
2. Left surround –
3. Right su
4. Right surround –
5. Common
6. Back surround left +
7. Back surround left –
8. Back surround right +
9. Back surround right –
10. Common
1. No connect
2. No connect
3. Right +
4. Right –
5. Common
6. Sub
7. Subwoofer –
8. No connect
9. No connect
10. Common
1. No connect
2. No connect
3. Left +
4. Left –
5. Common
6. No connect
7. No connect
8.
9. Center –
10. Common
N/C = no connect
Figure 5.1 HD-15 Connector Pinout
Содержание Crown DSi 8M
Страница 11: ......