Chapter 3: NVR Web Interface Configuration Options
23
N6123 NVR User Manual
NVR Setup Section
The
NVR Setup
section of the
Settings
page is shown in
FIG. 18
NVR Setup Section
TABLE 3
Settings Page: NVR Setup Section
Option
Description
Notes
Device Name
Enter a user-friendly name for the unit.
More descriptive names in this field help you organize
and manage the SVSI system efficiently. Keep in mind
the matrices are organized alphanumerically.
Mode
Select the series you will be recording from (N1000,
N2000, or N3000).
You can only record from
one series at a time
.
Compressed N2151 streams are recorded in N2000
mode.
Conversion Mode
Select an
MP4
or
MOV
format for your conversions
HDCP or encrypted N3000 streams cannot be
converted. Unencrypted N3000 streams can be
converted to MP4.
Mute
Enable to mute playback audio.
Stream
(from 1 up to 10,
depending on the Mode
selected)
View/edit the output stream number of the NVR. This is
the stream number(s) that will be used for playback.
The Decoder used for playback must match this stream
number.
These fields will not populate until a
Mode
is chosen.
The number of streams listed depends on which
series is selected.
N1000
Mode
has one stream, while N2000 has two,
and N3000 has ten.
Record Vid
The
Record Vid
number is the stream number of the
Encoder you wish to record from.
These fields will not populate until a
Mode
is chosen.
The number of record stream numbers listed depends
on which series is selected.
N1000
Mode
has one record stream, while N2000
has two, and N3000 has ten.
Advanced Settings
on page 24 for details on
the options available from this link.
Time Settings
on page 26 for details on the
options available from this link.
Cancel
Click to return all controls to the last saved
configuration.
Save
Click to accept changes made to these controls.
