Harman AMX NMX-NVR-N6123, Руководство пользователя

Страница: 24 / 41

Chapter 3: NVR Web Interface Configuration Options
24
N6123 NVR User Manual
Advanced Settings
The section of the Settings page shown in Figure 19 is displayed when you click the Advanced Settings link. Options are described
in Table 4 .
FIG. 19
Advanced Settings
TABLE 4
Settings Page: Advanced Settings Section
Option Description Notes
Unsolicited Status Enable the NVR to send a periodic status packet to the
Send Status Address described below.
Send Status Address When Unsolicited Status is enabled, the NVR sends a
periodic status packet to the IP address specified here.
Gen1 Status Packet Enable to cause the reporting status to be compatible
with older SVSI equipment.
Status Interval (secs) Determine how often (in seconds) the unit transmits
status packets.
Auto Delete MB Limit If you would like for recordings to be automatically
deleted once a space limit is reached (in MB), select a
limit from this drop-down box. Older recordings are
deleted first.
TTL Select the Time To Live (TTL) for the transmit audio and
video streams.
Limits the lifespan of data on the transmit audio and
video streams (to improve performance).
VLAN Tagging Enable to have the NVR insert a VLAN identification
number into the packet headers (in order to identify
which VLAN the packet belongs to). The VLAN # setting
determines what number is inserted.
SNMP Enable Enable to allow the NVR to be monitored via SNMP
(Simple Network Management Protocol).
VLAN # Enter the VLAN identification number. If VLAN Tagging
is enabled, this number is added to the packet headers
for packet identification purposes.
MPEG Conversions add
timestamp
When converting recordings to MPEG or MOV files, you
can enable this option to allow a time stamp to be
appended to the newly-converted file’s name.
The MPEG Conversions append description option
must be enabled for the time stamp to appear in the
new filename.
MPEG Conversions add
stream numbers
When converting recordings to MPEG or MOV files, you
can enable this option to allow the recording’s stream
number to be appended to the newly-converted file’s
name.
MPEG Conversions append description option must
be enabled for the stream number to appear in the
new filename.