Encoder Configuration Options
N2412A/N2422A User Manual
26
TABLE 1
Settings Page: Encoder Setup Section (Cont.)
Option
Description
Notes
Image Quality
Adjust the compression level of the image. The further
to the left on the slider, the more compression which will
display as pixelization of the image.
Video Mute
Enable to mute video by outputting solid black.
Audio Mute
Enable to stop the transmission of audio data onto the
network.
Audio Source
Set the audio source to be disabled, enabled or selected
automatically (see note).
The
AUTO
setting always corresponds to HDMI audio
as long as there is an HDMI source. If the source is
unplugged, it will automatically fall back to analog
audio (if there is an analog source plugged in).
Color Space Correction
Set the color space settings for the Encoder (YcbCr,
RGB) to be disabled, enabled, or selected automatically
based on the source.
If you see a pink/green washed out screen (across
the entire image), this can be changed by modifying
color space settings. Most sources function with
Auto
selected but (for problematic sources) hard-set the
value to what the source requires. It is best to do
hard-set for all permanently installed sources (e.g.,
cameras, cable boxes, etc), but leave
Auto
on for
periodic sources (e.g., laptop inputs).
Color Space Range
Set the color space range for the Encoder.
“Auto” detects the range from the source.
“Limited” forces limited color space.
“Full” forces full range color space.
Cancel
Click to return all controls to the last saved
configuration.
This button affects all
Encoder Setup
controls that
are listed above it.
Save
Click to accept changes made to the controls.
This button affects all
Encoder Setup
controls that
are listed above it.
Advanced Settings
Refer to
on page 27 for details on
the options available from this link.
RS232 Settings
Refer to
on page 29 for details on the
options available from this link.
Effects Settings
Refer to
on page 29 for details on the
options available from this link.
Allow SVSI Multicast
Disable this option to prevent the port from outputting
multicast video traffic.
Particularly useful if you are connecting a non-SVSI
device (i.e., not an N-Series device) to a port for
network-based control.
Disable P1
Completely disables the P1 port for all traffic.
Once disabled, anything connected to the P1 port will
no longer be available on the network.
Cancel
Click to return the related controls to the last saved
configuration.
This button affects the
Allow SVSI Multicast
and
Disable P1
controls.
Save
Click to accept changes made to the related controls. This button affects the
Allow SVSI Multicast
and
Disable P1
controls.