background image

pg. 25

 

 

ICSLAN Ports

  

The MU-1000/2300/3300 controllers have two types of Ethernet ports: LAN and ICSLAN.  

The LAN port is used to connect the controller to an external network, and the ICSLAN ports are used to connect to 

other AMX equipment or third-party A/V equipment. The ICSLAN ports on all models provide Ethernet Communication 

to connected AMX Ethernet Equipment in a way that is isolated from the primary LAN connection. The ICSLAN port is a 

10/100 Port RJ-45 connector and Auto MDI/MDI-X enabled. The controller will listen on either port for Harman 

communication buses such as ICSP, HIQnet, and HControl. 

 

Using the ICSLAN Network

  

ICSLan Network Settings 

The default IP address for the ICSLAN network is 198.18.0.1 with a subnet mask of 255.255.0.0. You are able to set the 

subnet mask and network address for ICSLan on the MU controller’s built in web server. 

Note: 

It is important that the ICSLAN and LAN subnets do not overlap. If the LAN port is configured such that its address 

space overlaps with the ICSLAN network, the ICSLAN network will be DISABLED.  

DHCP Server

  

The ICSLAN port has a built-in DHCP server. This DHCP server is enabled by default and will serve IP addresses to any 

connected devices set to DHCP mode. The DHCP server can be disabled from the MU controller’s built in web server The 

DHCP address range is assigned to half the available IP addresses in the assign subnet.  

Opening LAN and ICSLAN Sockets from Code

  

When opening sockets from any script there is no mechanism to indicate which network to use. The controller will open 

the socket on whichever network has an IP subnet that matches the address provided in the command to open the 

socket. There is no indication which network was used, only whether the socket was created successfully. 

LAN 10/100 Port 

All MU-series controllers feature a LAN 10/100 port to provide 10/100 Mbps communication via Category cable. This is 

an Auto MDI/MDI-X enabled port, which allows you to use either straight-through or crossover Ethernet cables. The port 

supports IPv4 and IPv6 networks, as well as HTTP, HTTPS, Telnet, and FTP. 

The LAN port automatically negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use half duplex or 

full duplex mode. 

The LAN port gets its IP address(es) in one or more of the following ways: 

IPv4 

 

Static assignment by the user 

 

Dynamic assignment by an IPv4 DHCP server 

 

Link local as a fall back when configured for DHCP but unable to successfully obtain address 

IPv6 

 

Link local address 

 

Prefix(es) assigned by a router 

 

 

 

Содержание AMX MU Series





























Отзывы: