Thank you
Symbols Used
Important Note!
2
DMS
700
for purchasing an AKG product. This manual contains important instructions for setting up and op-
erating your equipment. Please take a few minutes to
read the instructions below carefully be-
fore operating the equipment.
Please keep the manual for future reference. We hope you enjoy
using your system!
The lightning flash with arrowpoint in an equilateral triangle means that there are dan-
gerous voltages present within the unit.
The exclamation point in an equilateral triangle on the equipment indicates that it is nec-
essary for the user to refer to the User Manual. In the User Manual, this symbol marks in-
structions that the user must follow to ensure safe operation of the equipment.
• AKG continually improves the internal firmware of the DMS 700 system in order to meet
changing customer needs in the best possible way. Should your system use a different
firmware version than the one described in this user manual, some functions may differ
from the related instructions.
•
To find out the actual firmware version implemented in your system, please check the
menu. The firmware version described in this user manual is stated on the cover page.
•
Before you read on, we recommend comparing the receiver firmware version against
the version described in the manual. If the two versions are not identical, please visit
www.akg.com to find out about the latest changes.
L
↯
L
!
L
!
FCC Statement
The DHT 700 D5, DHT 700 D7, DHT 700 C5, and DPT 700 have been tested and found to com-
ply with the limits for a low-power auxiliary station pursuant to Part 74 of the FCC Rules. The DSR
700 has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC
regulations.
Changes or modifications not expressly approved in writing by AKG Acoustics may void the user’s
authority to operate this equipment.
The DSR 700 complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
DMS 700_2B_Quad Manual_120306 23.01.2012 9:10 Uhr Seite 2 (Schwarz/Black Auszug)
