Harman Stove Company Exception Скачать руководство пользователя страница 16

Exception F200 wood Insert

16

hARmAN gOld wARRANTY

6 YEAR TRANSFERAblE lImITEd wARRANTY 

(Residential)

1 YEAR lImITEd wARRANTY (Commercial)

Harman Stove Company warrants its products to be free from defects in material or workmanship, in normal use and 

service, for a period of 6 years from the date of sales invoice and for mechanical and electrical failures, in normal use and 

service, for a period of 3 years from the date of sales invoice.

If defective in material or workmanship, during the warranty period, Harman Stove Company will, at its option, repair 

or replace the product as described below.

The warranty above constitutes the entire warranty with respect to Harman Stove Company products.  HARMAN STOVE 

COMPANY  MAKES  NO  OTHER  WARRANTY,  EXPRESSED  OR  IMPLIED,  INCLUDING  “ANY”  WARRANTY  

OF MERCHANTABILITY,  OR  WARRANTY  OF  FITNESS  FOR  A  PARTICULAR  PURPOSE.  No employee, agent, 

dealer, or other person is authorized to give any warranty on behalf of Harman Stove Company.  This warranty does not 

apply if the product has been altered in any way after leaving the factory.  Harman Stove Company and its agents assume 

no liability for “resultant damages of any kind” arising from the use of its products.  In addition, the manufacturer and its 

warranty administrator shall be held free and harmless from liability from damage to property related to the operation, proper 

or improper, of the equipment.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

THESE WARRANTIES  APPLY only if the device is installed and operated as recommended in the user’s manual.

THESE WARRANTIES WILL NOT APPLY if abuse, accident, improper installation, negligence, or use beyond rated 

capacity causes damage.

HOW  TO MAKE A CLAIM - Any claim under this warranty should be made to the dealer from whom this appliance 

was purchased.  Then contact is made with manufacturer, giving the model and serial numbers, the date of purchase, your 

dealer’s name and address, plus a simple explanation of the nature of the defect.  Extra costs such as mileage and overtime 

are not covered.  Nuisance calls are not covered by these warranties.

THIS  WARRANTY  IS  LIMITED  TO  DEFECTIVE  PARTS - REPAIR  AND/OR  REPLACEMENT,  AT  HAR-

MAN  STOVE  COMPANY’S  OPTION  AND  EXCLUDES  ANY  INCIDENTAL  AND  CONSEQUENTIAL  DAM-

AGES  CONNECTED  THEREWITH.

WARRANTY EXCLUSIONS: Failure due, but not limited to, fire, lightning, acts of God, power failures and/or surges, 

rust, corrosion and venting problems are not covered.  Damage and/or repairs including but not limited to; remote controls, 

filters, fuses, knobs, glass, ceramic brick panels, ceramic fiber afterburners, door packing, tile, ceramic log sets, paint, bat-

teries or battery back-up and related duct work are not covered. Also excluded from this warranty are consumable or normal 

wear items including but not limited to; flame guides, grates, coal bars, afterburner hoods, fire brick, gaskets. Additional 

exclusions for corn stoves are burnpot housing weldment, burnpot grate weldment (pellet or corn), burnpot front plate (pellet 

or corn), burnpot front plate lock, corn auger extension, ceramic insert, and ceramic insert plate. Additional or unusual utility 

bills incurred due to any malfunction or defect in equipment and the labor cost of gaining access to or removal of a unit that 

requires special tools or equipment are not covered.  Maintenance needed to keep the stove in “good operating condition” is 

not covered.  This includes, but is not limited to, cleaning, adjustment of customer controls and customer education.  Labor, 

materials, expenses and/or equipment needed to comply with law and/or regulations set forth by any governmental agencies 

are not covered. 

This Warranty provides specific legal rights and the consumer may have other rights that vary from state to state.

In the event of change in ownership, the remaining portion of this warranty may be transferred to the new owner by 

sending the new owner information and a transfer fee of $25.00 US to the Harman Stove Company.

PLEASE  READ  THE  LITERATURE  BY  THE  MANUFACTURER  FOR  THE  VARIOUS  ACCESSORY  DE-

VICES.   THE MANUFACTURER  WARRANTS  THESE  ACCESSORY  DEVICES,  NOT  HARMAN  STOVE  COM-

PANY  OR  THEIR WARRANTY  ADMINISTRATOR.  FURTHERMORE,  THESE  ACCESSORY  DEVICES  MUST  

BE  INSTALLED  AND  USED ACCORDING  TO  THE  RECOMMENDATIONS  OF  THE  MANUFACTURER.

REMEDIES - The remedies set forth herein are exclusive and the liability of seller with respect to any contract or sale 

or anything done in connection therewith, whether in Contract, in tort, under any warranty, or otherwise, shall not, except as 

herein expressly provided, exceed the price of the equipment or part of which such liability is based.

CLARIFY - The above represents the complete warranty, which is given in connection with stoves, manufactured by 

Harman Stove Company.  No other commitments, verbal or otherwise, shall apply except by a written addendum to this 

warranty.

Содержание Exception

















Отзывы: