ENGLISH
15. PST SCAN BUTTON
Pressing this button puts the tuner
into an automatic mode that steps
through each of the stations that have
been preset into the unit’s memory.
Each programmed station will be
played for approximately five seconds
and then the next programmed
station will be played. To stop the
tuner at a desired station, simply
press the PST SCAN button.
16. DISPLAY MODE BUTTON
Pressing this button dims the
intensity of the front panel display
indicators. Press the button again to
return indicators to their normal
brightness.
17. NUMERIC PRESET
BUTTONS
These buttons are used to select
stations that have been entered into
the preset memories or to enter those
stations in conjunction with the
MEMORY button (#3).
•
To recall a previously program-
med station, press the
appropriate button. For single
digit numbers (1 - 9), press the
number and the station will be
tuned in a few seconds. To recall
preset locations 10 through 30,
press the desired buttons in order
and the station will be tuned in a
few seconds.
•
To use the buttons to enter a
station to the preset system,
follow the instructions on page # 9.
18. FLUORESCENT DISPLAY
The display panel contains a large 8
digit display for station frequency
information and RDS data, as well as
status indicators for various tuner
functions and operating states.
6
TU950 230V-eng 11/01/98 15:18 Side 6
