OPERATION
9
Preset Setting
Besides having the TU 970 create a station list,
you can also store presents into the tuners memo-
ry.
1. Tune to the desired station with the
Control
Ring
)
.
2. Press the
Memory Button
on the front
panel
9
or on the remote control
9
. You will
see the 01 segments in the
Information
Display
7
will start to blink.
3. Turn the
Control Ring
, until the desired
station preset is shown in the Information Display.
The desired preset can also be entered with the
Numeric Keys
on the remote control
1
.
4. Within 4 seconds, press the
Memory Button
again to store the station in the memory.
Information settings
The DAB signal contains besides the radio sta-
tion additional information. This information can
be made visible in the lower display line of the
Information Display
7
.
The following information is available to display:
1. Dynamic Label Segment (DLS): scrolling text,
supplied by the broadcaster.
2. Program Type: describes the type of broad-
cast, e.g. Pop Music or Drama.
3. Multiplex Name: will show the name of the
multiplex of the broadcaster.
4. Time and Date.
5. Bitrate: shows the bitrate of the incoming
digital signal.
6. Channel and Frequency.
To change between the options, press the
Info
Button
on the front panel
5
or on the remote
control
3
. Note that the upper display line will
always show the actual station. Pressing the
Info Button
again will show the next option.
When you have found the information you
would like to display, press the
Select Button
!
8
to activate the change.
Function Control
The DAB mode in the TU 970 contains a menu
structure to access various system options. To
enter the menu, press the
Function Button
on
the front panel
4
or on the remote control
6
once. To scroll through the list of sections of the
menu, turn the
Control Ring
)
or press the
Scroll Buttons
on the remote control
5
. The
sections will be shown on the lower display line
in the
Information Display
. To enter a section
and see the options, press the
Select Button
Select button
!
8
. You can scroll through
the options with the
Control Ring
and activate
an option by pressing the
Select Button
once
that option is shown on the
Information
Display
.
Station Order
In this section you can select the way the station
list is displayed. The options are Favorite Station,
Alphanumeric, Active Station and Tidy Station.
The Favorite Station option will build the station
list based on the stations that you listen to most
of the time. These stations will be marked on the
Information Display
with a “Y”-symbol. The
10 favorite stations will be moved to the start of
your station list, so you do not always have to
scroll through the whole list to find your favorite
station.
The Alphanumeric option is the default setting. It
will list the stations in numeric and alphabetical
order.
The Active Station option will sort the station list
by quality of the signal. The stations with the
best reception will be shown on top of the list.
Stations with weak or no reception will be
moved to the bottom of the list.
The Tidy Station option will do the same as the
Active Station option, but will remove the sta-
tions in your area with no reception.
Signal Error Rate
In this section you can see the level of correction
the TU 970 is applying to the DAB signal to
maintain the audio quality. The level will be indi-
cated by a numeric value between 0 (no correc-
tion) and 99 (maximum correction). For an
acceptable quality, the value of 50 should not be
exceeded.
Operation
