Bedienungselemente und Anzeigen
5
1. Power Switch
Press to turn unit on/off.
2. Record/Pause
Puts cassette deck in Record ready or pause
mode.
3. Play
Begins playback or recording.
4. Stop
Stops tape transport in any mode.
5. Rewind/Fast Forward
Rapidly rewinds/advances tape.
6. Record Mute
Inserts blank space when recording.
7. Intro Scan
Previews each segment on a pre-recorded
tape.
8. Search Forward and Reverse
Locates the start of any desired segment on
a pre-recorded tape (See page #7).
9. Dolby NR
Activates Dolby Noise Reduction circuitry for
playing or recording tapes.
10. B/C
Selects Dolby B or Dolby C Noise Reduction.
11. MPX Filter
Press when recording FM stereo broadcasts
using Dolby noise reduction.
12. Bias Fine Trim
Adjust when recording (See page #8).
13. Balance
Adjusts balance between left and right
channels when recording.
14. Record Level
Adjusts recording level.
15. Open/Close
Press to load/remove tape cassette.
16. Cassette
Compartment/Drawer
17. Counter Reset
Resets Tape Counter to 00:00.
18. CD Sync
Engage when synchronizing recording with a
Harman Kardon CD Player.
19. Tape Source
Selects between the signal recorded on the
tape and the input source signal. When
“Tape” is selected the indicator above the
button will light.
20. Remote IR Sensor
Receives the remote control signals.
21. Counter
Indicates tape position in minutes and
seconds.
22. Level
Shows signal level.
23. Intro
Indicates Intro Scan is engaged.
24. REC, PLAY
Displays operating mode: Record, Play,
Rewind or Fast Forward.
25. TYPE I II IV
Automatically indicates type of tape in use.
26.
B C or S
Shows if Dolby B , C or S circuits are on.
27. Bias Tone
Adjust when recording. (See page 8.)
28. REC Cal
Push when recording using Dolby Noise
Reduction. (See page 8.)
29. REC Cal Volume
Adjust when recording using Dolby Noise
Reduction. (See page 8.)
22
25
26
‚
‚
dB -35 -20 -10 -7 -5 -3 -1 +1 +3 +5 +8
L
R
INTRO REC PLAY
MPX TYPE I II IV
BCS
21
23
24
ENGLISH
24505_TD470 eng 12/01/98 14:01 Side 5
