Harman Kardon NOCTURNE 330 Скачать руководство пользователя

Страница: 12 / 130

MAIN REMOTE CONTROL FUNCTIONS

Direct Button:

Press this button when the tuner

is in use to start the sequence for direct entry of a sta-
tion’s frequency. After pressing the button, simply
press the proper

Numeric Keys

to select a sta-

tion. (See page 29 for more information on the tuner.)

Tuning Up/Down:

When the tuner is in use, these

buttons will tune up or down through the selected fre-
quency band. If the

Tuner Mode Button

has

been pressed so that

AUTO

appears in the on-

screen and

Lower Display Line

, pressing and

holding either of the buttons for three seconds will
cause the tuner to seek the next station with acceptable
signal strength for quality reception. When

MANUAL

appears in the

Lower Display Line

, pressing these

buttons will tune stations in single-step increments. (See
page 29 for more information.)

OSD Button:

Press this button to activate the

On-Screen Display (OSD) system used to set up or
adjust the AVR 330’s parameters.

Dolby Mode Selector:

This button is used to

select from among the available Dolby Surround pro-
cessing modes. Each press of this button will select
one of the Dolby Pro Logic II modes or Dolby 3
Stereo. When a Dolby Digital-encoded source is in use,
the Dolby Digital mode may also be selected. (See
page 27 for the available Dolby surround mode
options.)

DTS Digital Mode Selector:

When a DTS-

encoded digital source is selected, each press of this
button will scroll through the available DTS modes. The
specific choice of modes will vary according to whether
or not the source material contains DTS-ES 6.1
Discrete encoding. When a DTS source is not in use,
this button has no function. (See page 27 for the avail-
able DTS Digital options.)

Logic 7 Mode Select Button:

Press this button

to select from among the available Logic 7 surround
modes. (See page 27 for the available Logic 7
options.)

Skip Up/Down Buttons:

These buttons do not

have a direct function with the AVR 330, but when
used with a compatibly programmed CD or DVD
changer they will change to the previous disc in the
changer or carousel.

Transport Controls:

These buttons do not have

any functions for the AVR 330, but they may be
programmed for the forward/reverse play operation
of a wide variety of CD or DVD players, and audio or
video cassette recorders. (See page 36 for more
information.)

Stereo Mode Select Button:

Press this button

to select a stereo listening mode. When the button is
pressed so that

DSP SURR OFF

appears in the

Lower Display Line

, the AVR will operate in a

bypass mode with true, fully analog, two-channel
left/right stereo mode with no surround processing or
bass management, as opposed to other modes where
digital processing is used. When the button is pressed
so that

SURROUND OFF

appears in the

Lower

Display Line

, you may enjoy a two-channel pres-

entation of the sound along with the benefits of bass
management. Depending on whether your system is
configured for 5.1 or 6.1/7.1 channels, the next press
of the button will cause either

5 CH STERO

CH STEREO

to appear, and the stereo signal will

be routed to all five ( or seven) speakers. (See page
27 for more information on stereo playbaqck modes.)

DTS Neo:6 Mode Select:

Press this button to

select a DTS Neo:6 mode. These modes take a two-
channel stereo- or matrix surround-encoded source
and create a full five-, six- or seven-channel sound
field. (See page 27 for the available DTS Neo:6
options.)

Macro Buttons:

Press these buttons to store or

recall a “Macro”, which is a preprogrammed sequence
of commands stored in the remote. (See page 35 for
more information on storing and recalling macros.)

Disc Skip Button:

This button has no direct

function for the AVR 330 but is most often used to
change to the next disc in a CD or DVD player when
the remote is programmed for that type of device.
(See page 36 for more information on using the
remote with products other than the AVR 330.)

Preset Up/Down:

When the tuner is in use,

press these buttons to scroll through the stations
programmed into the AVR 330’s memory. When
some source devices, such as CD players, VCRs and
cassette decks, are selected using the device

Input

Selectors

, these buttons may function as

Chapter Step or Track Advance.

Clear Button:

Press this button to clear incorrect

entries when using the remote to directly enter a radio
station’s frequency.

Memory Button:

Press this button to enter a

radio station into the AVR 330’s preset memory. First,
tune the desired station, and then press this button.
Two underline indicators will flash at the right side of
the

Upper Display Line

, and within five seconds

press the

Numeric Keys

for the preset number

between 01 and 30 that you wish to assign to the
station. (See page 29 for more information.)

Delay/Prev Ch.:

Press this button to begin

the process for setting the delay times used by the
AVR 330 when processing surround sound. After
pressing this button, the delay times are entered by
pressing the

Set Button

and then using the

⁄

Buttons

to change the setting. Press the

Set Button

again to complete the process.

(See page 22 for more information.)

Speaker Select:

Press this button to begin

the process of configuring the AVR 330’s bass man-
agement system for use with the type of speakers
used in your system. Once the button has been
pressed, use the

⁄

Buttons

to select the

channel you wish to set up. Press the

Set Button

and then select another channel to configure.

When all adjustments have been completed, press
the

Set Button

twice to exit the settings and

return to normal operation. (See page 20 for more
information.)

Multiroom:

Press this button to activate the

multiroom system or to begin the process of changing
the input or volume level for the second zone. (See
pages 31 and 33 for more information on the
Multiroom system.)

Volume Up/Down:

Press these buttons to raise

or lower the system volume.

TV/Video Selector:

This button does not have a

direct function on the AVR 330, but when used with a
compatibly programmed VCR, DVD or satellite receiver
that has a “TV/Video” function, pressing this button will
switch between the output of the player or receiver
and the external video input to that player. Consult the
owner’s manual for your specific player or receiver for
the details of how it implements this function.

SPL Selector:

This button activates the

AVR 330’s EzSet function to quickly and accurately
calibrate the AVR 330’s output levels. Press and hold
the button for three seconds and then release it. Press
the “

” or “

”

Numeric Key

to indicate whether

you are using a 5.1-channel or a 6.1/7.1-channel
speaker system with the AVR 330. The test tone will
begin circulating, and the

Program/SPL Indicator

will change colors. During this sequence, EzSet

will automatically adjust the output levels for all chan-
nels until they are equal, as shown by the

Program/

SPL Indicator

lighting green for each channel.

Press this button again when the adjustment is com-
plete to turn off the test tone. (See page 23 for more
information on EzSet.)