SUB-TS7 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS 5
SUB-TS7 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS
OFF
ON
AUTO
ON
FILTER
NORMAL
REVERSE
PHASE
IN
OUT
AC 120V~60Hz
POWER
"WARNING: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE T 2.5A L/250 VOLT FUSE"
"AVERTISSEMENT: UTILISEZ UN FUSIBLE DE RECHANGE DE MEME
TYPE T 2.5A L/250V"
R
L
LINE
LEVEL
IN
MAX
MIN
IMPORTANT: CONNECT STRIPED WIRE
TO RED ( ) SPEAKER TERMINAL.
L
R
SUBWOOFER
LEVEL
SUB-TS7
For use with
HKTS 7 System
R ISK OF ELEC TR IC SH O C K
D O NO T OPE N
C A U TIO N
R ISK OF ELEC TR IC SH O C K
D O NO T OPE N
C A U TIO N
R ISK OF ELEC TR IC SH O C K
D O NO T OPE N
H
I
G
H
L
E
V
E
L
SUB
¡
™
£
¢
∞
§
¶
•
ª
‚
¡
Subwoofer-Level Control:
Volume
may be adjusted using the
Subwoofer-
Level Control
. Turn the control clockwise
to increase the SUB-TS7’s volume, or
counterclockwise to decrease it.
™
High-Cut (Low-Pass) Filter Switch:
Placing this switch in the
ON
position acti-
vates circuitry that cuts out all audio input
signals above 120Hz. This allows the SUB-
TS7 to focus its power on reproducing the
low-frequency portion of the signal, avoiding
inefficiency and distortion. Engage this filter
when using the
Speaker-Level Inputs
•
,
or when using the
Line-Level Full-Range
Inputs
§
, unless your receiver or processor
processes its line-level output using a low-
pass filter. The filter has no effect when the
SUB Input
∞
is used.
£
Music-Sense On/Off Switch:
When
placed in the
AUTO
position, and when the
Master Power Switch
ª
is turned on, the
SUB-TS7 will automatically turn itself on or
place itself in the Standby mode, depending on
whether it is receiving an audio signal. When
this switch is placed in the
ON
position, the
SUB-TS7 will remain on, whether or not it is
receiving an audio signal.
An LED located on top of the SUB-TS7 indi-
cates whether the SUB-TS7 is in the ON or
STANDBY state when used with the
Music-
Sense On/Off Switch
£
in the
AUTO
position. The LED is lit blue to indicate that
the SUB-TS7 is receiving an audio signal
¡
Subwoofer-Level Control
™
High-Cut (Low-Pass) Filter Switch
£
Music-Sense On/Off Switch
¢
Phase Switch
∞
Line-Level Subwoofer (SUB) Input
§
Line-Level Full-Range Inputs
¶
Speaker-Level Outputs
•
Speaker-Level Inputs
ª
Master Power Switch
‚
AC Power Cord
HKTS 7 OM 11/4/03 11:30 AM Page 7
