Harman Kardon HK3475 Скачать руководство пользователя

Страница: 6 / 20

Preset Scan:

Press this button to automatically

scan through the stations that have been programmed
in the HK 3475’s memory. The tuner will play five sec-
onds of each station before moving to the next preset
station. To stop the scan when the desired station is
heard, press the button again. If no preset stations
have been programmed into the HK 3475’s memory,
the message

0 PRESET

will flash in the

Main

Information Display

when this button is pressed.

(See page 15 for more information on the tuner
memory system.)

CD Input Selector:

Press this button to listen

to the output of a CD player connected to the

Inputs

Aux Input Selector:

Press this button to listen

to the output of a device connected to the

Aux

Inputs

•

Preset Selector:

Press this button to step up or

down through the list of stations that has been entered
into the preset memory. If no preset stations have
been programmed into the HK 3475’s memory, the
message

0 PRESET

will flash in the

Main

Information Display

when this button is pressed.

(See page 15 for more information on tuner pro-
gramming.)

VMAx Selector:

Press this button to engage

VMAx processing of a stereo input. The

VMAx Mode

Indicator

will light, and you will notice a wider,

more spacious sound field. In order to obtain maxi-
mum benefit, you should be seated midway between
the two loudspeakers, and the same distance from
the speakers as the speakers are from each other.
The speakers must be placed facing parallel and
evenly with each other so that their baffles are in
the same plane. Press the button again to return
to Stereo mode.

FM/AM Selector:

Press this button to select the

tuner as the input to the receiver. When the tuner is in
use, press this button to change between the AM and
FM frequency bands.

FM Mode Selector:

Press this button to select

the Stereo or Mono mode for FM tuning. In the
STEREO mode, a

Stereo

indicator will light in the

Main

Information Display

, and stereo reception will be

provided when stations are transmitting stereo signals.
In the MONO mode, the left and right signals from
stereo broadcasts will be mixed together and repro-
duced through all channels. Select MONO for better
reception of weak signals. VMAx will have no effect in
MONO mode.

(

Sleep Button:

Press this button to place the unit

in the Sleep mode. Each press of the button selects
the amount of time that will remain before the unit
automatically goes into the Standby mode, as shown in
the

Main Information Display

, in the following

order:

Bass Control:

Turn this control to modify the low-

frequency output of the left and right channels by as
much as ±10dB. Set this control to a suitable position
for your taste and room acoustics.

Treble Control:

Turn this control to modify the

high-frequency output of the left and right channels by
as much as ±10dB. Set this control to a suitable posi-
tion for your taste and room acoustics.



Balance Control:

Turn this control to change the

relative volume for the left and right channels.

Volume Control:

Turn the knob clockwise to

increase volume, counterclockwise to decrease the
volume.

Volume/Mute Indicator:

This indicator will glow

green when the HK 3475 is turned on. Its position will
enable you to judge the relative volume of the unit
even when the speakers are muted or turned off.
When the indicator is pointing toward the left, as
in an “8 o’clock” position, the volume is low; when
it is pointing to the right, as in a “3 o’clock” position,
the volume is loud. We recommend that you do not
furn the Volume Control past the “12 o’clock” position,
at which point the audio signal will begin to distort.
Such distortion, although inaudible, is capable of dam-
aging your hearing and your equipment. When the unit
has been muted by pressing the

Mute Button

the indicator will flash.

Main Information Display:

This display delivers

messages and status indications to help you operate
the receiver.

Speaker Selection Indicators:

These indicators

light as a green LED next to the designation for each
speaker pair to show when they are active. Press the

Speaker 1

Speaker 2

selectors to acti-

vate either pair of speakers. Both sets of speakers
may be selected simultaneously as long as all speak-
ers have a nominal impedance of 8 ohms or greater.
However, occasionally the actual impedance will vary,
depending upon the program material. If the imped-
ance drops to a point where there may be potential
damage to the equipment, the HK 3475 will go into
protect mode.

Remote Sensor Window:

The sensor behind

this window receives infrared signals from the remote
control. Aim the remote at this area and do not block
or cover it unless an external remote sensor is
installed.

min