REAR-PANEL CONNECTIONS 9
REAR-PANEL CONNECTIONS
fl
Subwoofer Out:
Connect these jacks to the line-
level inputs of a powered subwoofer. If an external sub-
woofer amplifier is used, connect these jacks to the
subwoofer amplifier inputs. When a single, mono sub-
woofer is used, or if the subwoofer or its amplifier has
only a single line-level input jack, make the connection
to the bottom jack on the HK 3475.
‡
Speaker 1 Terminals:
Connect these terminals
to the appropriate terminals on your speakers.
°
Speaker 2 Terminals:
Connect these terminals
to the appropriate terminals on your speakers.
·
Accessory Outlets:
These outlets may be used
to power low-current draw devices such as CD players
or cassette decks. The power to these outlets remains
on as long as the receiver itself is on. When the
receiver is turned off, or placed in the Standby mode,
power to these outlets is removed.
NOTE: The power consumption of the devices plugged
into these outlets should not exceed 100 watts.
a
Power Cable:
Connect the AC plug to a non-
switched AC wall output.
