Remote control Functions
9
HK 3700/3770
Remote Control Functions
the following remote control functions are available on the remote provided with the
HK 3700/3770 stereo receiver:
1. power On/Off
2. Mute
3. external device source selection
4. Stereo
5. Source selector
6. Harman volume
7. Menu access
8. navigation pad
9. tone control
10. exit
11. numeric keys
12. volume control
13. Speaker 1/2 selection
14. preset selection
15. Sleep
16. dimmer
17. preset scan
18. auto preset
19. RdS function
20. Memory
21. transport control
1.
Power ON and OFF
: press these buttons to turn the stereo receiver On and OFF.
2.
Mute
: press this button to mute or unmute the system.
3.
External device source selection
: press one of these buttons to select a source
device, such as cable/Sat, Rtv, and so on. this action will also turn on the stereo receiver
and switch the remote’s control mode to operate the selected source device.
4.
Stereo
: press this button if you want to shift the control from the external device
back to the stereo receiver.
5.
Source selector
: press one of these buttons to select a source device, which is a
component where a playback signal originates, e.g., dvd, cd or the tuner. this will also
turn on the receiver and switch to the correct source input.
press the auX button and digital button (HK 3770 only) to assign the audio input to
one of the source selections. For example, if your cd is connected to the analog input 1
(a1), press the cd source button, and then press the auX button to assign ana 1 input
to the cd source.
6.
Harman Volume (HK 3770 Only)
: this button cycles the Harman volume function
between high, low and off. Harman volume is an advanced digital signal processing
technology to control playback volume. It evens out the volume level on everything you
watch, improving your listening experience. Once you choose the volume level, Harman
volume does the rest. It helps you avoid volume increases from commercials, volume
differences when you change channels or switch sources, and brings out the dialogue.
7.
Menu
: this button helps you enter into the settings menu.
8.
Navigation pad
: these buttons are used to navigate through the menu system.
9.
Tone control
: press this button to access the bass and treble controls. use the OK
button to select an adjustment and use the up/down buttons to change the settings.
10.
Exit
: use this key to go back from the setup menu.
11.
Numeric keys
: use these buttons to enter radio station frequencies when using the
tuner (after pressing the direct button), or to select station presets.
12.
Volume control
: press these buttons to increase or decrease the volume level.
13.
Speaker 1/2 selection
: press the Speaker 1 button to enable the HK 3700/3770
Speaker 1 outputs, and press the Speaker 2 button to enable the Speaker 2 outputs.
you may enable or disable both sets of speaker outputs simultaneously. this feature is a
convenient way of hearing audio in more than one room at a time, although the same
source material will be played through both sets of speakers.
14.
Preset selection
: press this button to select the stations you have previously
programmed as presets.
15.
Sleep
: press this button to activate the sleep timer, which shuts off the receiver
after a programmed period of time up to 90 minutes. press the Sleep button to reduce
the time by 10 minutes.
16.
Dimmer
: press this button once to dim the display to half-brightness, and a second
time to turn the display completely off. the power Indicator will always remain lit to
remind you that the receiver is turned On. press the button a third time to return the
display to normal brightness. this setting is cancelled when the unit is turned OFF.