8
REMOTE CONTROL FUNCTIONS
Remote Control Functions
0
Power Off:
Press this button to put the
unit in the Standby mode.
1
Power On:
Press this button to turn on the
HD 755. Note that in order for the Power On
button to operate, AC power must be applied to
the unit, and the
Status Mode Indicator
2
should glow orange (See page 11 for more infor-
mation). The unit will also turn on when any
other button on the front panel or emote control
is pressed.
2
Numeric Controls:
Press these buttons to
select a specific track on a disc. The unit will
immediately search for the track and begin to play
it. For tracks 1 through 9 on a disc, you need only
press the desired number. For tracks 10 and
above, the second digit of the number must be
entered within two seconds of the first digit. (See
page 10 for more information.) These buttons are
also used to enter track numbers into the memory
for pre-programmed play lists. (See page 13 for
complete information on programming the
HD 755.)
3
Program Button:
Press this button to
begin the process of programming the HD 755
to play the tracks on a disc in a specific order.
Once the button is pressed, enter each of the
desired track numbers in quick succession using
the
Numeric Controls
2
. When you have
entered the tracks to be played, press the
Play
button
9
to begin the programmed sequence.
(See page 13 for complete information
on programming the HD 755.)
4
Clear Button:
Press this button to remove
selected or all tracks from the programmed
sequence. (See page 13 for complete information
on programming the HD 755.)
5
Repeat Button:
Press this button once to
repeat only the track that is currently being
played, and note that the
REPEAT
and
ONE
indi-
cators will light in the
Information Display
.
Press the button a second time so that the
REPEAT
and
ALL
indicators are illuminated to
repeat all tracks on the disc. (See page 14 for
more information on Repeat Play.)
6
Repeat A
›
B Button:
Press this button to
repeat a segment of the disc. Press the button
once to mark the start of the portion to be repeat-
ed. Press it again at the end of the desired
sequence. The marked passage will play continu-
ously until the
Stop
button
A
is pressed. (See
page 14 for more information on Repeat Play.)
7
Skip Buttons:
Press one of these buttons
to move to the next track
fl·
, or to move
back to the previous track
‡fi
(See page 12).
8
Search Buttons:
Press one of these but-
tons to search forward
—
or backwards
‚
through a disc to locate a particular por-
tion of the selection being played. Holding the
buttons pressed for some seconds will increase
the search speed (see page 12).
9
Play Button:
Press this button to start the
playback of a CD. If the CD drawer is open,
pressing this button will automatically close the
drawer.
A
Stop:
Press this button to stop the disc
currently being played or to escape from the
program mode (see page 13 for complete infor-
mation).
B
Pause Button:
Press this button once to
momentarily stop a disc. When the button is
pressed again, the disc will resume play at the
point it was stopped.
C
Random Button:
Press this button to
have all of the tracks played in a random order.
(See page 10 for more information.)
D
Time Button:
Press this button to select
the time display. In normal operation, the display
will show the running time of a track being
played. Press the button once to check the time
remaining for the track in play. Press the button
a third time to view the total play time remain-
ing for the disc in play (See page 11).
E
Check Button:
Press this button to check
the order of tracks programmed into the HD 755’s
memory. (See page 13 for complete information on
programming the HD 755.)
F
Open/Close:
Press this button to open or
close the disc drawer. The drawer may also be
closed by pressing the
Play
button
4
9
, or
by gently pressing the edge of the drawer.
However, we do not recommend pushing the
drawer, as damage to the transport mechanism
may result.
G
Display Button:
Press this button once to
dim the front panel display to half brightness.
Press it again to turn the display lights off
completely. Another press will return the display
to normal brightness.
