Harman Kardon DRIVE + PLAY [HK-DP1EU], Руководство пользователя

Страница: 10 / 12

Initial Setup (continued)
Setting FM Transmission (continued)
• To select a Custom FM Frequency:
1. Drive + Play Menu > FM Settings > Custom Frequency.
2. The FM Frequency graphic display will appear. Scroll to
select a desired FM frequency.
Setting Shuffle
You can set Drive + Play to shuffle (randomly play) iPod songs
or albums as follows:
• Drive + Play Menu > Settings > Shuffle > select Off (default),
Songs or Albums.
Setting Repeat
You can set Drive + Play to repeat the current iPod song or all
songs in a playlist or album as follows:
NOTE: When browsing by Artists, Genres or Composers,
selecting Repeat All will repeat the album that contains the
selected song.
• Drive + Play Menu > Settings > Shuffle > select Off (default) >
One > All.
Setting AUX Input
To route an audio signal from a device (e.g., cell phone or
satellite radio; see Wiring Diagram on page 5) connected to
Drive + Play’s auxiliary input to your mobile audio system:
• To select auxiliary input signals manually:
1. Drive + Play Menu > AUX input, or
Drive + Play Menu > Settings > AUX input.
2. Press Select button once to return.
• To disable the AUX input or to restore audio from the
connected iPod, press the Select button once.
Setting the Display
You can customize Drive + Play to display your viewing
preferences as follows:
• To enable or disable Large Fonts:
1. Drive + Play Menu > Settings > Display Settings > select
Large Font check box to turn it on or off (default).
2. To enable or disable Large Fonts, press the (top) Menu
button twice to return to the Drive + Play menu.
NOTE: Drive + Play will store up to 32 characters for
display in the Now Playing screen, arranging the names
of songs in logical groups of characters. To display the
next logical group, press the Select button once. If there
are more characters than can be displayed in two
groups, the third group will appear after a few seconds,
followed by the first group again. If Auto Scroll is enabled,
the character groups will change automatically.
• To enable or disable Auto Scroll:
Drive + Play Menu > Settings > Display Settings >
Auto Scroll > select On or Off (default).
• To adjust the display’s contrast:
1. Drive + Play Menu > Settings > Display Settings > Adjust
Contrast.
2. The Contrast graphic display will appear. Scroll to select
a desired contrast.
• To adjust the display’s backlight:
1. Drive + Play Menu > Settings > Display Settings > Adjust
Backlight.
2. The Brightness graphic display will appear. Scroll to
select a desired brightness.
• You can set Drive + Play’s backlight to turn off after
10 seconds. When it is off, pressing any button on the
Control Knob will turn it back on. To turn the display’s
backlight timer on or off:
Drive + Play Menu > Settings > Display Settings > Backlight
Timer > select On (default is always on) or 10 sec.
• To enable or disable an inverted display (i.e., white text on
black background):
Drive + Play Menu > Settings > select Display Settings check
box to enable or disable (default) it.
Setting the Drive + Play (Main) Menu
You can set the Drive + Play (Main) Menu to display your choice
of menus as follows:
NOTE: As a default, the following eight menus will be
displayed (denoted by checked boxes): FM Settings, Now
Playing, Playlists, Artists, Albums, Songs, Genres and
Composers. If you want all these selections to display, then
skip this section.
1. Drive + Play Menu > Settings > Change Main Menu.
2. Scroll to a selection (e.g., Composers) you want to remove
and press the (center) Select Button once to uncheck the
box. To add the menu again, press the (center) Select
Button once to check the box.
3. Repeat step 2 for other menus you want to remove from or
add to the Main Menu.
NOTE: Settings cannot be removed from the Main Menu.
10 OPERATION