Harman Kardon Cen-TS20/30, Руководство по обслуживанию

Страница: 18 / 49

7
1. Decide on the location for the speaker (see Speaker Placement ,
on page 5).
2. Attach the center speaker wall-mount bracket to the wall using
hardware that is appropriate for the wall’s construction and
materials. Attach the anchors through the holes shown in
the illustration.
Wall-Mounting: Center Speaker
Use These Holes
to Attach Bracket
to Wall
3. Connect the speaker wire to the speaker terminals. Press down on
the top of the terminal to open the connection hole, insert the
wire’s bare end all the way into the hole and release the terminal
to secure the wire. Insert the conductor with the colored band into
the speaker’s red ( + ) terminal, and insert the other conductor
into the speaker’s black ( – ) terminal, as shown in the illustration.
NOTE: The center speaker weighs 3.3 lb (1.5kg). Be sure to use
hardware that can support this weight.
CAUTION: Before making speaker connections, be sure that your
receiver or amplifier is turned OFF and preferably, its AC cord is
unplugged from the AC power source.
+
–
A. Push Down on Cap
to Open Hole
B. Insert Bare Wire
into Open Hole
C. Release Cap
to Secure Wire
Important: Make sure the ( + ) and ( – ) bare wires do not touch each
other or the other terminal. Touching wires can cause a short circuit
that can damage your receiver or amplifier.
4. Using two of the supplied screws, attach the center speaker to
the wall-mount bracket, as shown in the illustration.
Supplied Screws
Wall-Mount
Bracket
Speakers and receivers/amplifiers have corresponding ( + ) and ( – )
connection terminals. Most electronics manufacturers, including
Harman Kardon, use red to denote the ( + ) terminal and black for the
( – ) terminal. Newer Harman Kardon receivers conform to the CEA
standard and therefore use a color other than red to denote
the ( + ) terminal for some speaker positions. See the table in
Color-Coding System , on page 5.
Each speaker wire included with your system has colored bands at
both ends of the ( + ) conductor, and the subwoofer cable has purple
connectors that correspond to the color of the HKTS200SUB’s LFE
jack. This system helps ensure that the speaker in each location is
connected to the correct receiver or amplifier terminals. In addition to
the colored bands at each end, each speaker wire’s ( + ) terminal has
ribs molded into its insulation to help identify it.
It is very important to connect each speaker identically: ( + ) on the
speaker to ( + ) on the receiver or amplifier, and ( – ) on the speaker
to ( – ) on the receiver or amplifier. Miswiring one or more speakers
results in thin sound, weak bass and a poor stereo image. With the
advent of multichannel surround-sound systems, connecting all of the
speakers in your system correctly is very important to achieving the
proper ambience and directionality of the program material.
CAUTION: Before making speaker connections, be sure that your
receiver or amplifier is turned OFF and preferably, its AC cord is
unplugged from the AC power outlet.
Speaker Connections
To connect the speaker wire to the terminals on the satellite and
center speakers, press down on the top of the terminal to open the
connection hole, insert the wire’s bare end all the way into the hole
and release the terminal to secure the wire. Insert the conductor with
the colored band into the speaker’s red ( + ) terminal, and insert the
other conductor into the speaker’s black ( – ) terminal, as shown in
the illustration.
IMPORTANT: Make sure the ( + ) and ( – ) bare wires do not touch
each other or the other terminal. Touching wires can cause a short
circuit that can damage your receiver or amplifier.
+
–
A. Push Down on Cap
to Open Hole
B. Insert Bare Wire
into Open Hole
C. Release Cap
to Secure Wire
Connecting Satellite Speakers with Supplied Bases
1. Remove the speaker’s base (see
Shelf
Placement , on page 5).
2. Pass the speaker wire through the opening
in the speaker base.
3. Connect the speaker wire as described above.
4. Reattach the speaker’s base as shown in
the illustration.
Connecting Satellite Speakers With Supplied
Wall-Mount Brackets
Follow the instructions in Wall-Mounting : Satellite Speakers , on page 5,
and Wall-Mounting: Center Speaker , opposite.
Harman Kardon HKTS 20+30+60 Service Manual
Page 18 of 49