14
ZONE II REMOTE CONTROL FUNCTIONS
Zone II Remote Control Functions
å
Power Off
∫
AVR Selector
ç
AM/FM Tuner Select
∂
Input Selectors
≠
Tuning Up/Down – Fast Play
ƒ
Record/Pause
©
Preset/Track Skip
˙
Disc Skip
î
Volume Up/Down
∆
Play Forward/Reverse/Stop
˚
Mute
NOTE:
The Zone II remote may be used in either
the same room where the AVR 7500 is located,
or it may be used in a separate room with an
optional infrared sensor that is connected to the
AVR 7500’s
Multi IR
input jack
b
. When it is
used in the same room as the AVR 7500, it will
control the functions of the AVR 7500 or any
compatible Harman Kardon products in that
room. When it is used in a separate room via a
sensor connected to the
Multi IR
Jack
b
, the
buttons for power, input source, volume and
mute will control the source and volume for the
second zone, as connected to the Multi Out
Jacks
‚
. (See page 39 for complete information
on using the Multiroom system.)
The Zone II remote may be used in either the
same room where the AVR 7500 is located, or it
may be used in a separate room with an option-
al infrared sensor that is connected to the
AVR 7500’s
Multi IR
input jack
.
å
Power Off:
When used in the room where
the AVR 7500 is located, press this button to
place the unit in Standby. When it is used in a
remote room with a sensor that is connected to
the
Multi IR
jack
, this button turns the
Multi-Room system off.
∫
AVR Selector:
Press this button to turn on
the AVR. The input in use when the unit was last
on will be selected.
ç
AM/FM Tuner Select:
Press this button to
select the Tuner as the input to the Multiroom
system. Press it again to change between the
AM and FM bands.
∂
Input Selectors:
When the AVR is off,
press one of these buttons to turn the unit on
and to select a specific input. When the unit is
already in use, pressing one of these buttons will
change the input.
≠
Tuning Up/Down – Fast Play:
These but-
tons may be used to change the frequency of
the tuner. These buttons may also control the
Fast Play or Fast Reverse functions of compatible
Harman Kardon CD, DVD or cassette decks in
the same room, or from a remote room when an
IR link is connected to the AVR 7500.
ƒ
Record/Pause:
Press this button to acti-
vate the Record or Pause function on compatible
Harman Kardon CD, DVD or Cassette Deck prod-
ucts.
©
Preset Up/Down – Track Skip:
When the
AVR’s tuner is selected as the input source, these
buttons will move up or down through the list of
stations that have been stored in the preset
memory. When a CD or DVD player is selected,
these buttons activate the forward or reverse
track or chapter skip functions.
˙
Disc Skip:
Press this button to change
discs on compatible Harman Kardon CD or DVD
changers.
î
Volume Up/Down:
When used in the
room where the AVR 7500 is located, press this
button to raise or lower the volume in that
room. When it is used in a remote room with a
sensor that is connected to the
Multi IR
Jack
, this button will raise or lower the volume in
the remote room.
∆
Play Forward/Reverse/Stop:
Press these
buttons to control compatible Harman Kardon
CD, DVD or cassette players.
˚
Mute:
When used in the room where the
AVR 7500 is located, press this button to tem-
porarily silence the unit. When it is used in a
remote room with a sensor that is connected to
the
Multi IR
Jack
, this button will temporari-
ly silence the feed to the remote room only.
Press the button again to return to the previous
volume level.
Important Note:
No matter in which room the
Zone II remote is used, as with the main remote
it is important to remember to press the
Input
Selector
button
∂
that corresponds to the
unit you wish to operate befor you change the
device to be controlled.
POWER
OFF
MUTE
AVR
AM//FM
VID 1
VID 3
DVD
CD
TAPE
DN
TUNING
PRESET
VOLUME
DISC SKIP
DISC SKIP
UP
DN
UP
VID 4
VID 2
G
A
B
C
D
E
F
H
I
K
J
