Harman Kardon AVR 7300 Скачать руководство пользователя страница 15

Страница: 15 / 158

MAIN REMOTE CONTROL FUNCTIONS

IMPORTANT NOTE:

The AVR 7300’s remote may

be programmed to control up to nine devices,
including the AVR 7300. Before using the remote,
it is important to remember to press the

Input

Selector Button

that corresponds to the unit

you wish to operate. In addition, the AVR 7300’s
remote is shipped from the factory to operate the
AVR 7300 and most Harman Kardon CD or DVD
players and cassette decks. The remote is also
capable of operating a wide variety of other products
using the control codes that are part of the remote.
Before using the remote with other products, follow
the instructions on pages 46 – 55 to program the
proper codes for the products in your system.

It is also important to remember that many of the
buttons on the remote take on different functions,
depending on the product selected using the

Input

Selectors

. The descriptions shown here primarily

detail the functions of the remote when it is used to
operate the AVR 7300.

Power Off Button:

Press this button to place

the AVR 7300 or a selected device in the Standby
mode. Note that this will turn off the main room
functions, but if the Multiroom system is activated,
it will continue to function.

Power On Button:

Press this button to turn on

the power to a device selected by first pressing one of
the

Input Selectors

LCD Information Display:

This two-line screen

displays various information depending on the com-
mands that have been entered into the remote.

Input Selectors:

Pressing one of these buttons

will perform three actions at the same time. First, if the
AVR 7300 is not turned on, this will power up the unit.
Next, it will select the source shown on the button as
the input to the AVR 7300. Finally, it will change the
remote control so that it controls the device selected.
After pressing one of these buttons, you must press
the

AVR Selector Button

again to operate the

AVR 7300’s functions with the remote.

AVR Selector:

Pressing this button will switch the

remote so that it will operate the AVR 7300's functions.
If the AVR 7300 is in the Standby mode, it will also turn
the AVR 7300 on.

DSP Surround Mode Selector:

Press this

button to select one of the DSP surround modes, such
as VMAx, Hall 1, Hall 2 or Theater. Each press of the
button selects another mode. (See page 36 for more
information on surround modes.)

Test Button:

Press this button to begin the

sequence used to calibrate the AVR 7300’s output
levels. (See page 29 for more information on calibrat-
ing the AVR 7300.)

Video Processing On/Off Button:

Press this

button to turn the video processing circuits on or off.
See page 31 for more information.

Direct Button:

Press this button when the tuner

is in use to start the sequence for direct entry of a
station’s frequency. After pressing the button, simply
press the proper

Numeric Keys

to select a

station. (See page 39 for more information on the tuner.)

Clear Button:

When programming the remote

or using the EzSet feature, press this button to cancel
the current function. When using the remote to enter
frequencies for direct tuner access, press this button
to clear previous entries.

Numeric Keys:

These buttons serve as a 10-

button numeric keypad to enter tuner preset positions.
They are also used to select channel numbers when
TV, Cable or SAT has been selected on the remote, or
to select track numbers on a CD, DVD or LD player,
depending on how the remote has been programmed.
These buttons are also used to enter letters and num-
bers when renaming devices in the LCD Information
Display. (See page 53 for more information on renam-
ing devices and keys.)

Tuning Mode Button:

Press this button to

change the tuner mode between manual and
automatic. When the button is pressed so that

AUTO/STEREO

appears in the

Upper

Display Line

and in the on-screen display, only

stations with acceptable signal quality will be tuned,
and the tuner will play FM stations in stereo, when
available. In the

AUTO

mode, when the

Tuning

Up/Down Buttons

4w≠

are pressed, the unit

will automatically search for the next available station
with good signal strength. When this button is pressed
so that

MANUAL/MONO

appears in the

Upper

Display Line

and in the on-screen display, each

press of the

Tuning Up/Down Buttons

4w≠

will move the frequency up or down in single-step
increments. When the FM band is in use, pressing the
button so that the

MANUAL

mode is activated will

enable you to tune stations with weak signals by
changing to monaural reception. (See page 39 for
more information on tuner operation.)

Dim Button:

This button activates the Dimmer

function, which reduces the brightness of the front-
panel display, or turns it off entirely. Press the button
once to reduce the display brightness by 50%, and
press it again within five seconds and the main display
will go completely dark. Note that this setting is tem-
porary; regardless of any changes, the display will
always return to full brightness when the AVR is turned
on. The blue accent lighting inside the

Volume

Control

)

and the

Input/Output Indicator

will go out when the panel lights are at half brightness
or fully dimmed.

Channel Select Button:

This button is used to

start the process of setting the AVR 7300’s output levels
to an external source. Once this button is pressed, press
the

⁄

on the

Navigation Button

to select the

channel being adjusted, then press the

Set Button

followed by the

⁄

on the

Navigation Button

again, to change the level setting. (See page 40 for more
information.)

Navigation Button:

This single disc-like button is

used to navigate through the on-screen configuration
menus, to scroll through the options list and to select
choices for the various settings such as delay, speakers,
surround modes, digital inputs, etc. To use the button,
simply press it left, right, up or down in the direction
indicated by the

⁄

‹

›

icons printed on the but-

ton disc. Depending on the menu being used, press-
ing the button will either change a specific menu or
configuration choice or change the option shown in
the on-screen or front-panel display. The sections in
this manual describing the unit’s individual features and
configuration options contain specific information on
how the navigation controls are used.

Digital Select Button:

Press this button to assign

one of the digital inputs

®†

to a source.

(See page 37 for more information on using digital
inputs.)

Set Button:

This button is used to enter settings

into the AVR 7300’s memory. It is also used in the
setup procedures for delay time, speaker configuration
and channel output level adjustment.

Volume Up/Down Buttons:

These controls

share the disc in the lower portion of the remote with
the