2
TABLE OF CONTENTS
3
Introduction
4
Safety Information
5
Front Panel Controls
7
Front Panel Information Display
9
Rear Panel Connections
11
Main Remote Control Functions
14
Zone II Remote Control Functions
15
Installation and Connections
19
System Configuration
19
Speaker Selection and Placement
20
First Turn On and Use of OSD
20
Settings to be Made With
Each Input Used
21
Input Setup
21
Surround Setup
22
Speaker Setup
23
Adjustments for Other Inputs
23
Making Settings independent of selected
Input
23
Delay Settings
24
Night Mode Settings
24
Output Level Adjustment
25
Using EzSet
25
Manual Output Level Adjustment
27
Operation
27
Basic Operation
27
Source Selection
27
Controls and Use of Headphones
28
Surround Mode Chart
29
Surround Mode Selection
29
Digital Audio Playback
31
Tape Recording
32
Output Level Trim Adjustment
33
6-Channel Direct Input
33
Memory Backup
33
Tuner Operation
34
RDS Operation
36
Advanced Features
36
Display Brightness
36
Turn On Volume Level
37
Semi OSD Settings
37
Full-OSD Time Out Adjustment
38
Multiroom Operation
39
Programming the Remote
39
Programming the Remote with Codes
40
Code Readout
40
Learning Codes From a Remote
41
Macro Programming
42
Programmed Device Function
42
Volume Punch-Through
43
Channel Control Punch-Through
43
Transport Control Punch-Through
43
Reassigning Device Control
Selectors
43
Resetting the Remote Memory
44
Function List
46
Setup Code Tables
56
Troubleshooting Guide
56
Processor Reset
57
Technical Specifications
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE
– (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE
– (OCR type) indicates a message that is visible on the front-panel information display
1
– (number in a square) indicates a specific front-panel control
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
A
– (letter in a square) indicates an indicator in the front-panel display
å
– (letter in an oval) indicates a button on the Zone II remote
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described in
this owner’s manual is in compliance with technical stan-
dards:
EN 55013/6.1990
EN 55020/12.1994
EN 60065:1993
EN 61000-3-2/4.1995
Carsten Olesen
Harman Kardon Europe A/S
11/00