Harman Kardon AVR 254 Скачать руководство пользователя страница 60

Страница: 60 / 76

APPENDIX

Table A11 – Zone 2 Settings

Source Input

Device Type (if changed)

Your Settings

Status

Off

Source

Cable/Sat

Volume

-25dB

Surround Back Amps

Main Room

Table A12 – Surround Modes

Surround Mode

Description

Incoming Bitstream or Signal

Dolby Digital

Provides up to five separate main audio channels and a dedicated

• Dolby Digital 1/0/.0 or .1, 2/0/.0 or .1,

low-frequency effects (LFE) channel. May be encoded for Night mode,

3/0/.0 or .1, 2/1/.0 or .1, 2/2/.0 or .1,

which allows the user to apply a compression setting that maintains

3/2/.0 or .1

intelligibility of softer passages while reducing the loudness of dynamic

• Dolby Digital EX (played as 5.1)

passages to avoid disturbing others.

• Dolby Digital Plus decoded and delivered

via coax or optical connection.

Dolby Digital EX

An expansion of Dolby Digital 5.1 that adds a surround back channel

• Dolby Digital EX

which may be played through one or two surround back speakers. May

• Dolby Digital 2/2/.0 or .1, 3/2/.0 or .1

be manually selected when a non-EX Dolby Digital stream is detected.

Dolby Digital Plus

An enhanced version of Dolby Digital encoded more efficiently, Dolby

• Dolby Digital Plus via HDMI connection

Digital Plus has the capacity for additional discrete channels and for

(source device decodes to Dolby Digital

streaming audio from the internet, all with enhanced audio quality. Source

when a coax or optical connection is used).

material may be delivered via an HDMI connection, or decoded to Dolby
Digital or PCM and transmitted via S/P-DIF coaxial or optical digital audio.

Dolby TrueHD

Dolby TrueHD is an expansion of MLP Lossless

™

audio, the same format

• Blu-ray Disc or HD-DVD encoded with

used on DVD Audio discs. Dolby TrueHD adds the features found in

Dolby TrueHD, delivered via HDMI or

Dolby Digital, such as night mode settings, while delivering fully lossless

multichannel analog connection.

audio that is a true reproduction of the studio master recording.

Dolby Digital Stereo

Delivers a 2-channel downmix of Dolby Digital materials.

• Dolby Digital 1/0/.0 or .1, 2/0/.0 or .1,

3/0/.0 or .1, 2/1/.0 or .1, 2/2/.0 or .1,
3/2/.0 or .1

• Dolby Digital EX

Dolby Pro Logic II

Analog decoder that derives five full-range, discrete main audio channels

See below.

Mode Group

from matrix surround-encoded or 2-channel analog sources. Four variants
are available.

Dolby Pro Logic II

Variant of Dolby Pro Logic II that is optimized for movie and

• Dolby Digital 2.0 or 2.1

Movie

television programs.

• Analog (2-channel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

Dolby Pro Logic II

Variant of Dolby Pro Logic II that is optimized for music selections.

• Dolby Digital 2.0 or 2.1

Music

Allows adjustment of sound field presentation in three dimensions:

• Analog (2-channel)

• Center Width (adjusts width of vocal soundstage)

• Tuner

• Dimension (adjusts depth of soundstage)

• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

• Panorama (adjusts wraparound surround effect)

AVR254om.qxd 3/28/08 12:46 PM Page 60

Содержание AVR 254












































































Результаты поиска

Содержание AVR 254

Отзывы:

Похожие инструкции для AVR 254

Бренды по названию

Популярные бренды

Harman Kardon AVR 254, Руководство пользователя

Результаты поиска

Содержание AVR 254

Отзывы:

Похожие инструкции для AVR 254

Бренды по названию

Популярные бренды