Harman Kardon AVR 254 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 76

background image

2

SAFETY INFORMATION

Important Safety Instructions

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

The A/ V receiver’s cabinet may be cleaned by gently wiping with a soft cotton

or microfiber cloth. Do not use water or any liquid cleaners.

7.

Do not block any of the ventilation openings. Install in accordance with the
manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding-
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.

11.

Only use the attachments/accessories specified by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13.

Unplug this apparatus during lightning storms or when unused for long
periods of time.

14.

Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

Wet Location Marking

Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.

Service Instructions

CAUTION – These servicing instructions are for use by qualified service personnel
only. To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions, unless you are qualified to do so.

Outdoor Use Marking

WARNING – To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.

AVR254om.qxd 3/28/08 12:45 PM Page 2

«
1
2
3
4
...
»

Содержание AVR 254













































































Отзывы:

Нет отзывов

Похожие инструкции для AVR 254

Бренд: PAG Страницы: 2

Бренд: Yamaha Страницы: 99

Бренд: Yamaha Страницы: 74

V665 - RX AV Receiver

Бренд: Yamaha Страницы: 2

Бренд: Spektrum Страницы: 19

Бренд: Dual Страницы: 12

Бренд: LEGRAND Страницы: 48

Бренд: Seat Страницы: 46

Бренд: Clas Ohlson Страницы: 30

Бренд: ATN Страницы: 35

Бренд: Audiovox Страницы: 24

Бренд: YBA DESIGN Страницы: 54

Бренд: NAD Страницы: 32

Бренд: Lanzar Страницы: 8

Бренд: Xantech Страницы: 3

Бренд: YouKits Страницы: 3

Бренд: TTI Страницы: 39

Бренд: Topfield Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды