Harman Kardon AVR 240 Скачать руководство пользователя страница 22

Страница: 22 / 155

OPERATION

OPERATION 37

of digital surround encoding used and adjust to
accommodate it.

• When some digital sources are playing, you may

not be able to select some of the analog surround
modes such as Dolby Pro Logic II or IIx, Dolby 3
Stereo, Hall, Theater or Logic 7.

• When a Dolby Digital or DTS source is playing, it is

not possible to make an analog recording using the

Tape Outputs

and

Video 1 Audio Outputs

. However, the digital signals will be passed

through to the

Digital Audio Outputs

·a

Tuner Operation

The AVR 240’s tuner is capable of tuning AM, FM and
FM Stereo broadcast stations. Stations may be tuned
manually, or they may be stored as favorite station
presets and recalled from a 30-position memory.

Station Selection

1. Press the

AM/FM Tuner Select Button

the remote to select the tuner as an input. The
tuner may be selected from the front panel either
by pressing the

Input Source Selector

until

the tuner is active or by pressing the

Tuner Band

Selector

2. Press the

AM/FM Tuner Select Button

Tuner Band Selector

again to switch between

AM and FM so that the desired frequency band is
selected.

3. Press the

Tuner Mode Button

to select

manual or automatic tuning.

When the button is pressed so that

AUTO

appears in the

Lower Display Line

each

press of the

Tuning Selectors

will put

the tuner in a scan mode that seeks the next
higher- or lower-frequency station with acceptable
signal strength. An

AUTO ST TUNED

indica-

tion
will momentarily appear when the station stops
at a stereo FM station, and an

AUTO TUNED

indication will momentarily appear when an AM or
monaural FM station is tuned. Press the Tuning but-
tons again to scan to the next receivable station.

When the button is pressed so that

MANUAL

appears in the

Lower Display Line

each tap

of the Selector will increased or decrease the fre-
quency by one increment. When the tuner receives
a strong-enough signal for adequate reception,

MANUAL TUNED

will appear in the

Lower

Display Line

4. Stations may also be tuned directly in either the

automatic or manual mode. To enter a station’s fre-
quency directly, first select the AM or FM band as
desired be pressing the

AM/FM Tuner Select

Button

. Next, press the

Direct Button

Within five seconds of seeing the

DIRECT IN

scroll in the

Upper Display Line

, enter the

station frequency by pressing the

Numeric Keys

. If you press an incorrect button while entering

a direct frequency, press the

Clear Button

start over.

NOTE:

When FM reception of a station is weak, audio

quality will be increased by switching to Mono mode
by pressing the

Tuner Mode Button

so that

MANUAL

appears momentarily in the

Lower

Display Line

and goes out. This will also

activate manual tuning mode.

Preset Tuning

Using the remote, up to 30 stations may be stored in
the AVR 240’s memory for easy recall using the front
panel controls or the remote.

To enter a station into the memory, first tune the
station using the steps outlined above. Then:

1. Press the

Memory Button

on the remote.

Two underscore lines will appear at the far right
side of the

Upper Display Line

2. Within five seconds, press the

Numeric Keys

corresponding to the location where you wish to
store this station’s frequency. Once entered, the
preset number will appear in the

Upper Display

Line

3. Repeat the process after tuning any additional

stations to be preset.

Recalling Preset Stations

• To manually select a station previously entered in

the preset memory, press the

Numeric Keys

that correspond to the desired station’s memory
location.

• To manually tune through the list of stored preset

stations one by one, press the

Preset Stations

Selector Buttons

on the front panel or

remote.

Recording

In normal operation, the audio or video source
selected for listening through the AVR 240 is sent to
the record outputs. This means that any program you
are watching or listening to may be recorded simply
by placing machines connected to the

Tape Outputs

Video 1 Audio/Video

and

S-Video Outputs

in the Record mode.

When a digital audio recorder is connected to the

Digital Audio Outputs

·a

, you are able to record

the digital signal using a CD-R, MiniDisc or other digital
recording system.

NOTES:

• The digital outputs are active only when a digital sig-

nal is present, and they do not convert an analog
input to a digital signal, or change the format of the
digital signal. In addition, the digital recorder must
be compatible with the output signal. For example,
the PCM digital input from a CD player may be
recorded on a CD-R or MiniDisc, but Dolby Digital
or DTS signals may not.

• Please make certain that you are aware of any

copyright restrictions on any material you copy.
Unauthorized duplication of copyrighted materials
is prohibited by federal law.

Using

When Harman Kardon’s

(optional) is connected

and a compatible iPod

is docked in The Bridge, press

the

DMP Selector

Button

to choose

the iPod as the input source. Pressing the

DMP

Selector Button

will also activate the

AVR remote’s control codes for the iPod, and you may
also use the front-panel controls to operate the iPod.
You may also select DMP

as the source

from the front panel by repeatedly pressing the

Input

Source Selector

until

DMP

appears in the

Upper Display Line

, although no

Input

Indicator

will light.

When The Bridge is properly connected and a com-
patible iPod is properly docked,

DMP/THE

BRIDGE IS CONNECTED

will scroll

across the

Upper Display Line

. Once that mes-

sage appears, use the remote or front-panel buttons
to control the iPod. See the Function List Table on
pages 44–45 for a listing of the remote control but-
tons that have been programmed to control the iPod.
In brief, the

Reverse Search, Play

and

Forward

Search Buttons

and the

⁄

‹

›

Buttons

and

Set Button

may be used in a sim-

ilar manner to the corresponding controls on the
iPod. Additional buttons on the remote may also be
used to navigate your iPod’s albums and playlists.
Complete details on operating an iPod using
and an AVR remote are furnished with

The front-panel controls may be used to access a lim-
ited number of iPod functions. Press the

Tuner Mode

Button

to play or pause the current track. The

Tuning Selector

may be used to search reverse

(left side of button) or forward (right side of button)
through the tracks. Press the

Tuner Band Selector

to call up the iPod’s menu. Press the

Preset

Station Selectors

to scroll, and the