7, The "Loader 8051 firmware" driver has now been installed. At this point a new window will
appear with the words "Find new device", EZ USB device. Your computer will automatically install
the USB dirver for the DAL 150 at this time.
8, When the Harman Kardon “hk” icon appears in the systray (or task bar) in the lower right
corner of the your display, the installation of the DAL 150 is complete.
9, In order for the DAL 150 to operate, you must have the Windows Media Player Version 7.0 or
higher installed on your system. At this point the DAL 150 software will check to see if the proper
Windows Media Player is present on your computer and it will automatically install it if needed.
Please read 7.1 Windows Media player Installation.
d, Installation for WindowsXP
1, Connect one end of a USB cable (as supplied with the
DAL 150) into one end of the DAL 150, and connect the
other end to an available USB port on your computer or an
optional, external USB hub. Windows XP will recognize the
DAL 150 as a “New Hardware Found for USB Device” and
display the “Found New Hardware Wizard” window. Choose
“Install the software automatically (Recommended) option
and then Click
[Next].
