Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]
DocID: 380059_15.03.2016
EN
Safety instructions
A) Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic fields
B) Interference with other electrical equipment
Operating the device near radios or televisions may lead to radio interference.
Then increase the distance between the devices.
C) General handling
• To prevent damage, never use force when operating the switches and
controls.
Mini Looper
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these mate-
rials with your normal household waste, but make sure that they are collected for
recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal firm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your
local waste disposal facility.
User manual - Mini Looper
This manual contains important information on the safe operation of the device. Read
and follow the safety advices and instructions given. Retain the manual for future refer-
ence. If you pass on the device please include this manual.
• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or flammable cleaning agents.
• Disconnect the voltage supply of the device from the power grid when it is not in
use.
D) Keep these instructions!
After reading this manual, retain it for later use.
E) Keep foreign substances from the unit!
Keep the device away from containers with liquids. Should any liquid get into the unit,
this could lead to its destruction or fire. Be sure not to let any metal objects into the
unit.
Features
• 10 minutes maximum recording time
• Unlimited overdubs
• 1/4" phone in and output
• Exchange of WAVE files with computers possible
• USB cable for computer connection included
• The software is availbae for download from the product site of our homepage.
Controls and functions
Using the Looper
Recording / Overdubbing
• When the LED is off, press the foot switch once to activate the recording mode -
the LED will turn red.
• Press the foot switch once in recording mode to activate the playback mode -
the LED will turn green.
• Press the foot switch once in playback mode to activate the overdub mode - the
LED will turn red.
• Press the foot switch once in overdub mode to activate the playback mode - the
LED will turn green.
Deleting recordings
• In playback / overdub mode, keep the foot switch pressed for at least 2 seconds
until the LED blinks twice quickly. Then the last recording is deleted.
Technical specifications
Input:
1/4" phone socket (impedance: 470 kOhm)
Output:
1/4" phone socket (impedance: 100 kOhm)
Voltage supply:
9 V , centre pin = negative pole (
)
Current draw:
94 mA
Dimensions: 95 x 41.5 x 58 mm
Weight: 290 g
Restoring recordings
• To restore a deleted recording keep the foot switch again pressed for at least
2 seconds until the LED blinks twice quickly. Then the last deleted recording is
restored.
Starting, stopping deleting the loop
• In playback / overdub mode, press the foot switch twice quickly, then the LED
blinks green and playback / overdubbing are stopped.
• Press the foot switch while playback is stopped to let playback start again. The
LED lights green.
• Keep the foot switch pressed while playback is stopped for 2 seconds to delete
all recordings. The LED goes out.
1
Function switch to control the unit
2
LED for indicating the various functions
3
LEVEL control for adjusting the volume
4
Input socket for connecting the instrument
5
Output socket for connecting an amplifier etc.
6
Voltage supply connector (9 V,
)
