Harley Benton HB 3000 BT, Руководство пользователя

Страница: 5 / 12

- 5 -
2. Control Elements
2.1 Front panel
(HB115B MK III front panel)
INPUT connect your bass guitar here
GAIN to adjust the input sensitivity
COMPRESSOR activates the compressor, to reduce the dynamic range,
makes your bass sound tighter
COMP. RATE to set the compression value
CONTOUR this circuit lets you shape the character of your tone
CONT. GRADE if CONTOUR is activated, you can use this control to
figure out your favourite contour setting
BASS to decrease / increase the low frequencies
LOW MID to decrease / increase the low middle frequencies
HIGH MID to decrease / increase the high middle frequencies
TREBLE to decrease / increase the high frequencies
DEEP to additionally boost the low frequencies
BRIGHT to additionally boost the high frequencies
MUTE to mute the output
POWER ON power indicator
MASTER to set the output volume
PHONES connect your TRS jack headphones here
(HB3000BT front panel)
INPUT connect your bass guitar here
CLIP LED indicates an overloading input signal, lights up in red then
LIMITER to limit the input signal in order to avoid input overload
VOLUME adjust the input volume level
EQ to decrease / increase the EQ frequency levels of DEEP,
BRIGHT, BASS, LOW MID, HIGH MID ,TREBLE
EQ IN to activate / deactivate the EQ
MID SWEEP to set a frequency from 250 Hz - 4 kHz to boost
SWEEP LEVEL to decrease / increase the selected MID SWEEP frequency
MASTER to set the output volume
PHONES connect your TRS jack headphones here
MUTE LED to mute line out and speaker output. LED lights up in
light red then