Harken T2701B Скачать руководство пользователя страница 3

Position car on edge with retaining clip 

in place. Gently push one (1) ball at a 

time into car from center of clip. Allow 

balls to roll into return race and insert 

remaining balls.

 Do not overfill car!

Loading Ball Bearings into CB Cars

Ball Replacement Chart

Car

Length

Balls/car

Balls

Order

Balls/set

Ball Ø

T2701B, T2702B, T2703B, T2705B, T2721B, 

T2722 B, T2731B, T2732B, T2741B, T2742B

4

1

/

4

" (108 mm)

48

Torlon

®

1526

25

5

/

16

" (8 mm)

T2701B.HL, T2702B.HL, T2703B.HL, T2705B.HL, 

T2721B.HL, T2722B.HL, T2731B.HL, T2732B.HL, 

T2741B.HL, T2742B.HL

5

3

/

16

" (132 mm)

60

Torlon

1526

25

5

/

16

" (8 mm)

T2704B.HL, T2744B.HL (coupled car assemblies) 8

3

/

4

" (222 mm)

48 x 2*

Torlon

1526

25

5

/

16

" (8 mm)

*Coupled car assembly–each car has 48 balls.

Reeving Cars and Ball Bearing End Control Blocks

2:1 purchase

3:1 purchase

4:1 purchase

Attaching Splice to Deadend on Car or Controls

To attach premade splice, pass eye through bail and run tail 
through to make a hitch without undoing bail. If line is too  
large for this, remove one screw and rotate deadend eyestrap 
to load the splice. Reassemble screws using thead-locking 
solution such as blue Loctite

®

 adhesive.

Reeving Cars and End Control Blocks

3

4

1

1

2

2

1

2

3

1

2

3

4

6

5

3

4

1

1

2

2

1

2

3

1

2

3

4

6

5

3

4

1

1

2

2

1

2

3

1

2

3

4

6

5

2:1 purchase

3:1 purchase

4:1 purchase

Loctite is a registered trademark of Henkel AG & Company KGaA. 

Torlon is a registered trademark of Solvay Advanced Polymers.

Содержание T2701B






Отзывы: