9
Loosen top screw. Slide top track up and
position next 2.05 m (6'8
7
/
8
") track.
Mast-up:
Tighten bottom screw to
hold track.
Slide 19 mounting slugs and splice slug
into mast groove.
Mast-up:
Tape in place.
One drop blue Loctite
®
adhesive into
each hole.
Hold full-length track piece up to mast.
Loosely install top screw.
Use putty knife to slide additional slugs
and splice slug into place. Loosely install
all nineteen 5 mm x 20 mm screws.
Repeat until full-length tracks installed.
Hold switch in place and make sure there
is 64 mm (2
1
/
2
") below for loading cars.
Assembly—Slug-Mount
Install Track
Slide tracks up enough to fit next track.
Mast-up:
Hold upper tracks. Loosen screw
that holds tracks. Slide track up. If screws
bind in mast groove opening, loosen them
until track slides. Tighten new bottom
screw securely.
CAUTION! Do not let tracks
drop. Severe injury to hands
and/or fingers can result.
Loctite is a registered trademark of Henkel AG & Company KGaA.
