- 25
11 | EN 12841/C
ATTENTION
: The primary function of a Type C rope adjustment device is progression along the working line. EN 12841 rope
adjusters must not be used in fall arrest systems. The connection shall have a maximum length of 110 mm. An anchor rope
loaded with the full weight of a user is a working line. A Type A back-up device connected to a safety line must be used. Ensure
that the back-up system is never loaded onto the working line. Any overloading or dynamic loading may damage the anchor
rope.
Attach the descender directly to your harness using an EN 362 locking carabiner. Never use lanyards or extensions of any
type to connect the descender to your harness. Any equipment used with your descender must be in compliance with current
standards.
Anchor lines should be attached to anchor points above the user, and any slack in the anchor line between the user and the
anchors should be avoided.
The device was not tested to EN 12841/C 5.3.6, conditioning to oil or 5.3.7, conditioning to dust. Use caution when operating in
conditions where oil and dust are present.
Содержание CMC CLUTCH
