background image

Corporate Headquarters

1251 East Wisconsin Avenue, Pewaukee, Wisconsin 53072 USA 

Telephone: (262) 691-3320 

 Fax: (262) 691-3008 

 Cable: Harken Pewaukee 

Web: www.harken.com 

 Online Catalog: www.harkenstore.com 

Email: [email protected]

Harken France

ZA. Port des Minimes, BP 3064, 17032 - La Rochelle Cedex 1, France 

Telephone: (33) 05.46.44.51.20 

 Fax: (33) 05.46.44.25.70 

Web: www.harken.fr 

Email: [email protected]

Harken Italy S.P.A.

Via Marco Biagi, 14, 22070 Limido Comasco, (CO), Italy 

 Telephone: (39) 031.3523511 

 Fax: (39) 031.3520031 

Web: www.harken.it 

Email: [email protected]

Harken UK Ltd.

Bearing House, Ampress Lane 

Lymington, Hampshire S041 8LW, England 

 Telephone: (44) 01590-689122 

 Fax: (44) 01590-610274 

Web: www.harken.co.uk 

Email: [email protected]

Harken Poland

ul. Lisa Kuli 4 Lok.1, 01-512 Warszawa, Polska 

 Telephone: +48 607 979 747 

Web: www.harken.com 

Email: [email protected]

Harken Sweden

Mjölkekilsgatan 6, Box 64 

S-440 30 Marstrand, Sweden 

 Telephone: (46) 303-618 75 

 Fax: (46) 303-618 76 

Web: www.harken.se 

Email: [email protected]

Harken Adriatik d.o.o.

Obala 107 

6320 Portoroz, Slovenia 

 Telephone/Fax: 5-6774122 

Web: www.harken.si 

Email: [email protected]

Harken Australia, Pty, Ltd.

1B Green Street 

Brookvale, N.S.W. 2100, Australia 

 Telephone: (61) 2-8978-8666 

 Fax: (61) 2-8978-8667 

Web: www.harken.com.au 

Email: info.harken.com.au

Harken New Zealand, Ltd.

30-36 Fanshawe Street 

Auckland 1001, New Zealand 

 Telephone: (64) 9-303-3744 

 Fax: (64) 9-307-7987 

Web: www.harken.co.nz 

Email: [email protected]

Please visit: http://www.harken.com/dealers/dealers.php 

for an up-to-date list of Harken dealers and distributors

4362/9-08

Содержание Carbon



















Отзывы: