Replacing Elastomer Stand-Up Device
5261.W 11/18
1. Remove stainless toggle from
car.
2. Use pliers to squeeze circular
base of stand-up device; work
device up and out the side.
3. Install replacement piece
by squeezing circular base of
stand-up device and inserting
it from side of toggle.
IMPORTANT!
Make sure
toggle and elastomer
are right side up. Refer to
"Harken" on side of toggle.
Note:
Do not use pliers to
squeeze new stand-up device
while installing. This will
damage part.
Tip:
Use soap on circular
portion of stand-up device to
ease installation.
Warranty
Top
2. Install the pins and split
rings. Separate end of
ring and spin completely
in place like a key ring.
Install Control Blocks on 1643 Toggle (continued)
Detergent
Traveler Cars:
Clean by frequently flushing with fresh water. Periodically clean
car by squirting a detergent/water solution into center openings. Roll car back
and forth to distribute evenly then flush bearings with fresh water.
Do not use spray lubricants because ball bearings may skid, not roll. Apply
one to two drops of McLube
®
OneDrop
™
to ball contact surfaces of track. Roll
car back and forth through OneDrop several times to distribute onto bearings.
Wipe remaining OneDrop off track. OneDrop is preferred but you can also use
one to two drops of a light machine oil; too much oil attracts dirt.
Track:
Clean with detergent and water.
Important! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
Maintenance
Inspection
Frequently inspect shackles and control block fittings for signs of fatigue and replace
as necessary. Make sure every installation includes Harken track end stops. Arrange
control tackle so cars do not hit end stops under load.
For additional safety, maintenance and warranty information see
www.harken.com/manuals or the Harken catalog.
Loctite is a trademark of Henkel AG & Company KGaA.
McLube is a registered trademark of McGee Industries, Inc.
OneDrop is a trademark of McLube®, a Division of McGee
