Harken 1134 Скачать руководство пользователя страница 4

Maintenance 

Reorder Parts

Remove line from drive sheave. Clean furler with detergent and fresh water applied into drive sheave. 

Rotate drive sheave to distribute. Be sure to squirt into area just inside locking ring to clean bearings 

as shown by arrows at right.  Flush with fresh water while rotating parts. Inspect pins and rings to 

make sure they are secure. Make sure parts are dry and free of saltwater for long term storage. 

Replacement parts

Ref

Part number

Item name

Quantity

1

SP-008

CLEVIS PIN-.25X.789

2

2

MS-002

SPLIT RING-SB

2

3

MP-3053

STRIPPER-FURL SB CL

1

4

HFS1350

FST-M5X0.8X8MM EXTENDED PNT SET SCREW

 

2

1

2

3

4

      

Printed in USA  5195  10/17

Содержание 1134

Страница 1: ...tainless steel wire sewn into the luff with thimbles that are stitched to the tack and head so they will not turn 164 upper swivel For a hoistable jib furling system purchase an additional 464 hoistable halyard swivel and adapter tang See instruction manual 4350 on www harken com 1134 Specifications Use the continuous line drive furler for high performance skiffs dinghies sportboats and multihulls...

Страница 2: ...ler A Pass one end of loop into feeder pull through and pass the other end under the furler B Pass loop into the feeder and over the top Press the furling line into the drive sheave 1 349 34 26 1 095 27 81 0 250 2 890 73 41 3 247 82 47 2 684 68 17 0 312 7 92 0 6 35 Short continuous loop shown to illustrate loading A Loading from below B Loading from above Dimensions shown in inches and millimeters...

Страница 3: ...detents Rotate the lower fork so that it is 90 See image at bottom of page The screws will seat in either of two pairs of detents Leave guard in place for rotation Image for illustration only Use Blue Loctite adhesive or alternate threadlocking solution on threads Tighten the screws Leave guard in place for rotation Image for illustration only Loctite is a registered trademark of Henkel AG Company...

Страница 4: ...bearings as shown by arrows at right Flush with fresh water while rotating parts Inspect pins and rings to make sure they are secure Make sure parts are dry and free of saltwater for long term storage Replacement parts Ref Part number Item name Quantity 1 SP 008 CLEVIS PIN 25X 789 2 2 MS 002 SPLIT RING SB 2 3 MP 3053 STRIPPER FURL SB CL 1 4 HFS1350 FST M5X0 8X8MM EXTENDED PNT SET SCREW 2 1 2 3 4 P...

Отзывы: