Harken 1130, Руководство пользователя и по обслуживанию

Страница: 53 / 54

User and maintenance manual Winch 1130 – Mod.0 53
17. Troubleshooting
To identify the various components, refer to figures of the disassemble procedure for the
winch maintenance.
PROBLEMS POSSIBLE CAUSES POSSIBLE SOLUTIONS
●
The winch does
not engage
second
or third speed:
The first speed button does not
disengage
- check whether the outer edge of
the button is rubbing against the
inner edge of the stripper arm
support. If it is, contact the Harken
Italy Tech Service Team.
- slightly unscrew the set screws
so as to ease the pressure on the
balls housed in the upper dog
clutch.
This will help to disengage the first
speed button as the ball bearings
will slide more easily in the upper
race of the central shaft
WARNING!
Do not unscrew the set screws
excessively, because you risk not
having the upper dog clutch tight
enough against the upper race of
the shaft
- once the first speed button is
disengaged, check that the teeth
of the upper dog clutch do not
touch the lower dog clutch