Hark HK0511, Инструкция по сборке и эксплуатации

Страница: 8 / 17

8
B.
THE GAS SYSTEM
1. GAS AND REGULATOR INFORMATION
This cooker is designed for propane (LPG) gas use only. Gas bottles with a "POL"
connection are to be used with this barbecue. Suitable regulators must have an outlet
pressure of 69 kPa. You must have the proper regulator and bottle in order for the barbecue
to operate safely and efficiently. Ensure that a 100% propane (LPG) refillable gas cylinder
currently certified to Australian Standard AS2030.1:2009 is used. Do not use disposable gas
cylinders. Please note the hose and regulator supplied with this unit are of an approved type
and are specifically designed for use with your Jet-Pro Cooker.
It may be hazardous to attempt to fit other types of Gas containers.
2. CONNECTING THE HOSE AND REGULATOR TO THE GAS BOTTLE
— Only use the hose assembly supplied with this appliance for direct connection to the
cylinder – DO NOT USE ADAPTORS. Do not use any other hose assembly. Check the
gas hose for damage or signs of abrasion before each use.
— Keep the hose clear of sharp edges and hot surfaces.
— Avoid twisting or kinking the flexible hose.
— If damaged, do not use the hose and replace it immediately. If there is any doubt, contact
the customer service line on 1300 799 787.
— Make sure all Jet-Pro Cooker control knobs are in the off position. Connect the regulator
to the gas cylinder by inserting the regulator connection into the gas bottle outlet. This is
tightened in an anti clockwise motion.
— Firmly hand tighten and then be sure to check for leaks at all gas connections.
— Please note that the hose is already fitted with a valve that connects to the burner.
You do not have to adjust this connection but should leak test this once the hose and
regulator are connected to the gas cylinder.