Hark HK0511, Инструкция по сборке и эксплуатации

Страница: 7 / 17

7
STEP 3 METAL BASE RING ASSEMBLY
— Insert the metal base ring (5) in between all three legs so that each of three holes on the ring
match up with each hole at the end of the legs.
— Securely fasten the ring by inserting a M6X10 screw into each hole and tightening with a M6
nut. The screws should be inserted from the center of the ring outward.
STEP 4 STABILITY BRACKET ASSEMBLY
— Attach 3 stability brackets (7) to the Metal base ring as shown with an M6x10 screw and M6
nut. The screws should be inserted from the center of the ring outward. Note that the “T” shape
faces outward from the ring.
STEP 5 HOSE/REGULATOR ASSEMBLY
— Return the base to the upright position allowing the unit to stand on its newly assembled
legs.
— Carefully insert the threaded orifice end of the hose and regulator (3) into the center of the
narrow end of the burner venture (2) and carefully turn clockwise until tight and secure. You may
need a shifter to tighten the last section of the nut, BUT DO NOT OVER TIGHTEN.