Hark Barrel Spit HK0529 Скачать руководство пользователя страница 5

5

READ ALL INSTRUCTIONS, WARNINGS & SAFEGUARDS PRIOR TO ASSEMBLY & OPERATION.

FAILURE TO DO SO MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY.

DANGER

DANGER

- The Hark

®

 Barrel Spit

 

("spit") is for 

OUTDOOR USE ONLY.

- Never operate the spit unattended.

- The use of alcohol, prescription or non prescription 

drugs may impair your ability to properly assemble or 

safely operate the spit.

- Never operate this spit within 7.5 metres (25 feet) of 

any flammable liquids.

- Keep the area clear of all flammable liquids, 

combustible material including but not limited to 

wood, dry plants and including grass, brush, paper 

and canvas.

- Use this spit only on a level, stable non-combustible 

surface like brick, concrete or dirt. Do not use spit 

on or around any surface that will burn or melt, such 

as on wooden decks, dry grass, wood rails, vinyl or 

plastic.

- Never use inside an enclosed area such as screen 

patios, garages, buildings and tents. Keep a minimum 

clearance of 3 metres (10 feet) from all sides of the 

spit to all overhead construction and 1 metre (3 feet) 

from any walls or rails.

- Never operate this spit under any overhead roof 

covering, awning or overhang.

- Keep your hands, hair and face away from any naked 

flame. Do not lean over or into the firebox or grill when 

lighting or operating the spit. This spit has an open 

flame. Be careful of loose clothing and hair that could 

catch fire during operation of the spit.

- Always wear shoes and protective clothing during 

operation of this spit.

- The spit is HOT while in use and after use. Always 

wear protective gloves or mitts when operating the 

spit. Avoid touching hot surfaces at all times.

- Keep CHILDREN AND PETS away from the spit at 

all times. Do not allow anyone to conduct activities 

around the spit during or following its use until the unit 

has cooled.

- Never move the spit when it is in use. Allow the spit to 

cool before moving or storing it.

- Never use this spit as a heater.

- Never use in or on recreational vehicles and/or boats.

- Never use this product for anything other than its 

intended purposes. This spit is not intended for 

commercial use.

- Accessory attachments and cookware not supplied by 

Hark

®

 are not recommended for use.

- Never use glassware, plastic or ceramic cookware in 

the spit.

- Do not use in windy conditions or days of a Total Fire 

Ban.

- Do not allow charcoal and or wood to rest on the body 

of the barrel spit. Doing so will greatly reduce the life 

of the metal finish.

- Only build the fire in the charcoal tray.

- The Electric motor is for 240V AC only.

  To protect against electrical shock, do not immerse

  cord or plug in water or other liquids.

- Do not operate or leave the motor in the rain.

- Do not operate with damaged cord or plug.

- Do not allow cord to touch hot surfaces.

- Unplug the motor from power outlet before cleaning.

- Unplug the motor from power outlet and remove from 

barrel spit when not in use.

OUTDOOR USE ONLY

SAVE AND FILE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Содержание Barrel Spit HK0529














Отзывы: