(A)
(B)
Step 9:
Slide the edges of the plastic sheet as shown. First slide the top edge (A) under the locking brackets. Then press down at the center of the
sheet (B) to enable the lower edge (C) to slide into the locking brackets easily. (The matte surface should stay on the top)
Put the sheet edge (A)
in the Top Support Tube’s Locking Brackets
Open a sheet of Roll and
keep it flat as shown
Top Edge (A)
Center
Edge (B)
Bottom
Edge (C)
Diffuser Sheet
( )
C
Slowly Press
Center Edge (B)
to fit edge (C) in
Front Support Tube’s
Locking Brackets
Using the wing knobs provided attach the top support tube.
Step 7:
Step 8:
By using the wing knobs attach the supporting strip with rear lower tube
to left and right A-Support.
b.) Can fit the HARISON extension arm to
attach lights
(fig. 8.a.)
a.) Can use HARISON C-Clamp SP to fit a
light at the bottom to get rid of shadows.
(fig. 8.b.).
To add light:
You may attach Harison Argos LED Lights for a
well-illuminated Product Photography setup.
ASSEMBLY INSTRUCTIONS FOR
Photo Table 1575
R
for products details visit
www.harisonphoto.com
HARI SINGH & SONS
(An ISO 9001 : 2000 Company) G.T. Road, Near Canal, P.O. Sultanwind,
Amritsar - 143 021, INDIA. Phone: + 91-183-2586114 ,2589619 ,+91-8427952565
e-mail : [email protected] URL : www.harisonphoto.com
Fig. 8.a.
Page 2 of 2
Fig. 8.b.
