
product to cool before
id, as hot liquid can
cooled before carrying
パッキンの上面から水平に指で押し込みます。ガラスピッチャー
にパッキンがしっかり嵌っていることを確認してください。
※パッキンを斜めに押し込んだり、強い力で押し込むとパッキン
がガラスピッチャーの中に入り込むことがあります。ご注意く
ださい。
パッキンのツマミ部分を注ぎ口の 180 度の位置にして、水平にセットする。
ツマミ
フタの取り外し方
フタを外す際は、ピッチャーを少し傾けてフタを浮か
した状態で外していただくか、スプーンなどを使用し
てフタを浮かせて引き上げてください。
Make sure the lip is on the opposite side to the pouring spout, and set it so it is level.
Lip
Press the packing in uniformly from the top with your fingers.
※Please note that pressing the packing in unevenly or applying
excessive force may cause the packing to fall inside the glass
pitcher.
Removing the Lid
フタ・フィルター
Lid・Filter
パッキン /
Packing
ステンレス
Stainless steel
中国製 /MADE IN CHINA
・この製品は日本で品質管理し、組立てたものです。
・This product has been quality controlled and assembled in Japan.
ガラスピッチャー / Glass Pitcher
rubber
日本製 /MADE IN JAPAN
(
Heat resistance temperature diffrence:
120℃)
(
Heat resistance temperature :
180℃)
シリコーンゴム(耐熱温度 180℃)
耐熱ガラス(耐熱温度差 120℃)
日本製 /MADE IN JAPAN
Check that the packing fits securely into the glass pitcher before
pouring tea.
Material Guide
Tilt the decanter slightly so that the lid is slightly raised,
or use a spoon, etc. to raise the lid slightly for removal.