GRATE POSITION
FOR YOUR SAFETY
:
Do not use this appliance if any part has been underwater.
Immediately call a qualified service technician to inspect the appliance and to replace any
part of the system or gas control, which has been underwater
GRATE PLACEMENT
Place the Pedestal Grate over the burner
using the slots as a guide.
The grate should be placed over the burner
so the front legs of the grate are just in front
of the burner pipe.
LOG INSTALLATION
RECOMMENDED BURN-IN PERIOD:
Hargrove gas logs are made of special
refractory materials, which withstand high temperatures. One characteristic of this
material is retention of moisture. For this reason, we recommend burning the logs for
only fifteen minutes during the first burning. After allowing the logs to cool for at least
one hour, the set can be burned for any length of time.
LIMITED LIFETIME WARRANTY: Hargrove gas logs carry a limited lifetime warranty
against breakage in the original fireplace. Warranty does not include labor. This
warranty is void if excessive handling after burning causes breakage. All accessories
and metal parts carry a two year limited warranty in the original fireplace. Items will be
replaced during this period for the cost of shipping.
VOLCANIC CINDER PLACEMENT
The black volcanic cinders are used to cover the fireplace floor, fittings and tubing around the
burner system. Although not functional, the back cinders act as a picture frame to show off the
glowing embers and yellow flame.
Install the logs based on the installation diagram provided with the logs set, for Radiant Heat
logs it will not be necessary to remove the grate and install the radiant heat bracket (disgard
the radiant heat bracket packaged with Radiant Heat logs).
Once the logs have all been place you can readjust the grate positioning to get desired flame
pattern. When adjusting grate position be careful as the
GRATE WILL BE HOT
, it might be
necessary to let it cool between adjustments.
8
