Hardy HI 4050, Руководство пользователя, Страница: 165 / 192

Troubleshooting 157
•
•
•
•
•
•
Tests and Diagnostics
The Test and Diagnostics menus provide an expanded view of how the weight controller
and scale are working. You can run several tests from either the test links on the Web
Diagnostic page or the front panel Test menu. Each test is described in its own subsection
below.
You can also obtain information that a Hardy representative may ask for if you make a
request to Technical Support. For example, for the last calibration, you can see the type of
calibration and when it was done. You can also check the graduation size, operator ID, and
other configuration information, and you can learn the serial number, model number,
firmware revision number.
Diagnostic testing from the Web page
Step 1. From the Home Page
click on Operation.
The Operation Choose
One page appears.
Step 2. Click Diagnostics to
view the Operation-
Diagnostics Page.
The page lists the
Instrument ID, Model
Number, Program Part
Number, Firmware
Revision, Serial Number,
Last Calibration and Status
Word at a glance.
Diagnostic testing from the front panel
From the Configuration
menu, use the down arrow to
select Test and press Enter to
open the Test Menu. This
menu lists the tests you can
run.
It also lists the same read-only options as the Web-interface Operation-Diagnostics page,
including serial, model, and firmware revision numbers, etc.