Hardy Process Solutions HI 6600 Series, Быстрый старт

Страница: 6 / 12

channel number count located in the HardyNet sub ‐ menu of the
Gateway module menu structure.
The Channel Identification and channel order number may also be
modifed in the HardyNet sub ‐ menu section during system set up.
Once the discovery process is completed, proceed to setting up each
individual channel by following the basic SET UP instructions for each
channel outlined below.
Suggested steps when setting up the instrument for the first time:
Choose a specific Weight Processor Module to set up by selecting a
channel either from the front panel display or on the webserver.
SET UP (minimum)
1) Select Unit of Measure
2) Input Total Scale Capacity
3) Select Graduation Size
4) Select Decimal Point Position
5) Input Motion Tolerance
Filter
1) Num Averages
2) Waversaver
Calibration
1) Cal Date
2) Cal Method
a. C2 eCal
b. Hard Cal
3) Complete Cal Procedure
Channel
1) Choose channel to set ‐ up