Hardy Process Solutions HI 6600 Series, Быстрый старт

Страница: 2 / 12

DIN Rail Installation:
1. Place the top slot of the instrument onto the DIN rail first.
2. Rotate the instrument down until the bottom tab of the instrument
enguges with the DIN rail, then press firmly on the bottom on the
instrument until it snaps in place.
Note: Heavy Gage DIN rail recommended.
3. Check for proper DIN rail engag
em
e
nt
b
y
ge
n
tly lift
in
g up on t
he
bottom and making sure the instrument is securly in place.
4. Repeat with additional units as required for your system.
5. To remove an instrument from a DIN rail, disconnect wiring then lift
up on the bottom ‐ front corner of the module until it snaps off.