N2400386
IFU - XXXXX
3
2.0
Product Information
The Hardy IncuPRO Incubators are designed for laboratories and clinics that
require contemporary styling, accuracy, and economy in a basic incubator
package. The incubator uses a dial controlled thermostat and has the added
features of a digital temperature display and a double walled chamber door. The
incubator has a chamber volume of 0.8 cu. ft. (0.02 cu.m) and a chamber
temperature range of a5
˚
C to 60˚C. The incubator has a chamber
uniformity of +/- 1
˚
C at 37
˚
C within the bounds of the shelf area.
3.0
Assembly
3.1
Unpacking
Remove packing materials carefully, and retain for future shipment or
storage of the unit. Inspect for damage. Report all shipping damage to
the carrier immediately. Shipping damage is covered by the carrier and
repair/replacement for shipping damages must be coordinated through the
carrier. Complete and return the Warranty Registration Card. Packs
should contain:
•
133000H Incubator
•
Power Line Cord
•
Operating Instructions
•
Two Shelves
•
Eight Shelf Brackets
3.2
Installation
Place the Incubator on a flat and stable surface, preferably away from
drafts. Ensure that the surface on which the unit is placed will withstand
the radiated heat produced by typical laboratory incubators. Fit the power
line cord into the IEC power socket on the rear of the unit. Plug power
cord into a power supply that matches the voltage listed on the serial
number label on the rear of the unit.
Insert the wire rack shelves at the desired heights. Refer to the sketch
below for proper shelf bracket installation.
