Hardwood Mills GT26, Руководство пользователя

Страница: 18 / 45

Page | 18
Slide the top cross support over the round post and insert the pulley,
collar and bolt assembly into the hole.
Install the nut on the inside of the round post to secure the pulley.
Using a 16mm wrench to hold the nut, tighten the bolt.
Insert the bolts into the back plate as shown in above image. Align the square post holes with the
corresponding black top cross support holes. Tighten using an 18mm socket.
Place the measuring scale bracket as shown above and insert bolts and nuts. It is important to alternate
tightening of the nuts (top then bottom) to ensure the black round clamp begins to compress evenly on
both the top and bottom until flanges meet at outer edge. Tighten nuts using
a 13mm socket.